Hello!
Sorry for a long answer. I think I saw hello from previous configuration.
Now test it again and with mode = ptmp bird does not send hello until
neighbors are configured.
Unfortunatelly, I also does not lear neighbors from incoming hellos. Yes, I
know about API change, but official FreeBSD bird port is 1.6.3 and it has a
patch for FreeBSD 11.
With debug all I see the messages:
<TRACE> main_ospf: HELLO packet sent via em0
every 2 seconds (I changed settings), but tcpdump sees no packets on
interface :(
And yes, when mode is broadcast there are no problems really.
Regards,
Boris
вс, 5 февр. 2017 г. в 14:38, Борис Коваленко <b.ju.kovale...@gmail.com>:
> Hello!
>
> Trying to run bird on ethernet interface with type = ptmp. Yes, I know
> that ethernet is broadcast interface, but there is a good practice to use
> ptmp on ethernet. I found a strange bug. When type = ptmp, bird sends only
> one Hello packet and then stops (and even receive?) next packets until I
> fully restart bird, while other side (cisco or mikrotik) sends packets
> every 10s (as configured).
> There is no problems with type = broadcast
>
> Here is my simple test configuration:
> protocol ospf main_ospf {
> import all;
>
> instance id 0;
> tick 5;
>
> area 0.0.0.0 {
> networks {
> X.X.16.78/32;
> X.X.16.80/28;
> };
>
> interface "lo1" {
> type ptp;
> hello 60;
> retransmit 10;
> dead 30;
> };
>
> interface "em0.102" {
> cost 10;
> type ptmp;
> hello 10;
> retransmit 5;
> dead 40;
> #
> authentication cryptographic;
> password "XXXXX" {
> id 1;
> algorithm keyed md5;
> };
> };
> };
> }
>
> FreeBSD - 11-STABLE
> Bird 1.6.3
>
> With regards,
> Boris
>
> --
>
> С уважением,
> Борис Коваленко
>
--
С уважением,
Борис Коваленко
