Thank You Anton,
finally somebody with clean answer :)
See you on freenode :)
Viker
On 01/12/2016 10:42 AM, Anton Danilov wrote:
> Hello!
>
> You have two ways to announce the connected subnets:
>
> 1. Define the direct protocol and export this route to ospf. This
> routes will be anounced as external.
> 2. Enable ospf in passive mode on the corresponded interfaces.
>
> To get quick answers join the #bird on freenode irc.
>
>
> 2016-01-12 10:56 GMT+03:00 viker <vi...@viker.cz>:
>>
>> On 01/06/2016 09:26 AM, viker wrote:
>>> Hello everybody,
>>> i have a strange problem with propagation of subnets to OSPF area.
>>> scheme:
>>>
>>> --------------- Area 0 -----------------
>>> -- Router1 -- ------------------ -- Router 2 --
>>> --------------- -----------------
>>> | LAGG iface | LAGG iface
>>>
>>> On both routers are bonded ifaces in LAGG. When i create vlan on LAGG
>>> trunk (i'm on FreeBSD 10.2. bird 1.5.0), i have in route export only
>>> ip/32 on vlan iface, not whole subnet.
>>> Configuration of bird:
>>>
>>>
>>> #### Main ####
>>> log "/var/log/bird.log" all;
>>> router id XXX.XXX.XXX.XXX;
>>> debug protocols all;
>>>
>>> protocol static {
>>> route YYY.YYY.YYY.YYY/NN via "vlanXX";
>>> export all;
>>> import all;
>>> }
>>>
>>> protocol device {
>>> scan time 120;
>>> export all;
>>> }
>>>
>>> protocol kernel
>>> {
>>> learn;
>>> persist;
>>> scan time 30;
>>> import all;
>>> export all;
>>> }
>>>
>>> protocol ospf
>>> {
>>> import filter {
>>> accept;
>>> };
>>> export all;
>>> area 0.0.0.0 {
>>> interface "ix0" {
>>> cost 10;
>>> type broadcast;
>>> hello 10;
>>> retransmit 5;
>>> wait 15;
>>> dead 30;
>>> };
>>>
>>> networks {
>>> 10.0.0.0/8;
>>> 172.16.0.0/12;
>>> 192.168.0.0/16;
>>> };
>>> };
>>> };
>>>
>>>
>>> Interesting thing is , when i import subnet to main table via :route
>>> XXX.XXX.XXX.XXX via "vlanXXX"; in static protocol and do birdc
>>> configure, propagation is working.
>>> So it seems to me that protocol device (or kernel) is not correctly
>>> importing created subnet into main table.
>>> Any ideas ?
>>> Thank You All
>>> Viker
>>>
>> No reaction ? nobody has bird 1.5.0 on freebsd 10.2 with this issue ?
>> What about at least some information on which section could be problem ?
>> Viker
>>
>> --
>>
>>
>> S pozdravem Vilem Kebrt
>> email: vi...@viker.cz
>> tel: +420 604 550 132
>>
>
>
--
S pozdravem Vilem Kebrt
email: vi...@viker.cz
tel: +420 604 550 132
