On Wed, Jul 22, 2015 at 05:50:09PM +0100, Bernardo Figueiredo wrote: > Hello, > > When restarting some routers at the institution I work, sometimes bird > doesn't start announcing any routes until we either restart bird or restart > When this happens: ... > "bird> show ospf > (...) > Area networks: > 10.3.0.0/16 Advertise > 10.0.0.0/16 Advertise > (...)
> I think that even though when bird first starts it shouldn't immediately > start announcing(because it didn't see that the interfaces ip addresses), it > should after 10 seconds when it scans again, because then the interfaces are > already fully configured. ... > So, my question is, shouldn't the Device protocol scan update see that the > ip addresses of an interface have changed and if so, start announcing the > route. Hello BIRD Device protocol generally does not have problems with noticing new addresses. Most likely it could be problem with BIRD OSPF protocol not activating the interfaces / areas. Could you also report results of 'show interfaces' and 'show ospf interfaces' when it works and when it does not? Does help just restarting the OSPF protocol (birdc restart ospf1)? -- Elen sila lumenn' omentielvo Ondrej 'Santiago' Zajicek (email: santi...@crfreenet.org) OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net) "To err is human -- to blame it on a computer is even more so."
signature.asc
Description: Digital signature
