Hello, I find a way to resolve that problem but I don’t know why it happened.
I remove my session from my configuration file
Execute "bird -p -c /etc/bird/bird.conf”
Execute "birdc "configure soft”
I put again my session on my configuration file
Execute "bird -p -c /etc/bird/bird.conf”
Execute "birdc "configure soft”
It works :-)
--
Alexandre Corso
Network Engineer
+33 (0) 7 85 30 30 84
aco...@franceix.net
> On 15 Jul 2015, at 12:14, Alexandre Corso <aco...@franceix.net> wrote:
>
> Hello,
>
> I have a problem with one of my session. I've established a BGP session with
> one of my peer but I export very slowly all my routes (around 1 route every
> 20 sec)
>
> I tried to disable/enable the session, doesn’t change. I restarted the
> session, doesn’t change neither.
>
> On my log I have this :
>
> 2015-07-15 12:03:10 <TRACE> RXXXX_1: Incoming connection from X.X.X.X
> (port 60375) accepted
> 2015-07-15 12:03:10 <TRACE> RXXXX_1: BGP session established
> 2015-07-15 12:03:10 <TRACE> RXXXX_1: Connected to table TXXXX_peerA
> 2015-07-15 12:03:10 <TRACE> RXXXX_1: State changed to feed
> 2015-07-15 12:03:10 <TRACE> RXXXX_1: State changed to up
>
> This is my configuration :
>
> # Templates for BGP and pipes protocols
> template bgp PEERS {
> debug { events, states };
> local as MyASN;
> import all;
> export all;
> rs client;
> add paths tx;
> }
>
> template pipe PIPES {
> table master;
> mode transparent;
> }
>
> table TXXXX_peerA sorted;
> protocol pipe PXXXX from PIPES {
> table master;
> peer table TXXXX_peerA;
> import where bgp_in(peerA, XXXX);
> export where bgp_out(peerA, XXXX);
> }
> protocol bgp RXXXX_1 from PEERS {
> neighbor X.X.X.X as XXXX;
> import limit 20;
> table TXXXX_peerA;
> }
>
>
> Do you have some clue about this problem?
>
> --
> Alexandre Corso
> Network Engineer
> +33 (0) 7 85 30 30 84
> aco...@franceix.net <mailto:aco...@franceix.net>
>
>
>
>
>
signature.asc
Description: Message signed with OpenPGP using GPGMail
