In message <dub131-w630a8c19b5efbd0cf5e975ac...@phx.gbl>, hugo hugoo writes: > > Hello, > > Can anybody help me? > I am using bind 9.8.2 > > Sometime my provisionning system provision a bad record ina zone. > Example A record with 1.2.3.4.5 value (just an example). > > My provisioning system do not detect all bad situations and therefore I > can have a zone with only a bad record. > > This zone is not updated with a reload (this is OK)...but the whole zone > is no more loaded after a stop/start. > > Is it possible to tell BIND to reload all correct records and just > discard the bad record from the zone?
No. It is also a bad idea (been there, done that, not doing it again) in addition to being against RFC 1034. named-checkzone is designed as pre-load tool. Don't move the file into place until it passes named-checkzone. > I can only give the parameter "DISABLE_ZONE_CHECKING" = yes in order that > BIND starts. > > > Thanks in advance for your feedback, -- Mark Andrews, ISC 1 Seymour St., Dundas Valley, NSW 2117, Australia PHONE: +61 2 9871 4742 INTERNET: ma...@isc.org _______________________________________________ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
