In message <53216b43.8040...@gmail.com>, Peter writes: > Hi Kevin, > > Thanks for your reply. It's just for a closed internal network with no > access to the rest of the internet. Making labs such as testing ISP > functions and services, mail servers etc. Everything is running inside > an VMware host with an internal closed network. > > I have created a closed "Internet" on 172.16.x.x where I would like to > put up a root server for .loc, where several other ISP-DNS servers, with > domains, are referred to. I've managed to create those "ISP-DNS" servers > which works fine. But I'm having trouble to create the root DNS server > with Bind. I haven't found any useful examples at the web yet.
Perhaps because a root zone is like any other zone. It has a SOA record and NS records at the apex and other records. . 3600 SOA server.example.net. hostmaster.example.net. 1 3600 1200 2419200 3600 . 3600 NS server.example.net. . 3600 NS another.example.net. server.example.net. 3600 A 1.2.3.4 another.example.net. 3600 A 1.2.3.5 > It's for a school project. > > Regards, Peter > > > On 12/03/14 19:56, Kevin Darcy wrote: > > First of all, don't use .loc as an internal TLD. There are *many* > > proposals in process with ICANN for establishing new TLDs, and for all > > you know, .loc might be one of them. If .loc gets established on the > > Internet, and you're using it internally, that presents abundant > > opportunities for confusion and failure. > > > > Use a publically-registered domain, a descendant of a > > publically-registered domain, or potentially, one of the reserved TLDs > > in RFC 6761. > > > > I'm not sure what your question is, exactly. Set up the root zone, > > slave it, publish 2 or more of the master/slaves in the NS records, > > delegate whatever TLD you're going to use, set up *that* zone, lather, > > rinse, repeat, for the entire hierarchy. Anyone who reads > > _DNS_and_BIND_ should be able to set up an internal-root > > infrastructure, IMO (although, sadly, the later editions don't seem as > > aligned to internal-root as they used to be). > > > > - Kevin > > > > > > On 3/12/2014 11:07 AM, Peter wrote: > >> Hi guys, > >> > >> I'm doing a virtual internet (internal net) for several VPS's. My > >> goal is to simulate the Internet root servers and the ISP:s domain > >> servers, which are hosting the actual domains. I want to the create > >> several DNS nameservers that will contain the specific domain under > >> the "xxx.loc, yyy.loc, zzz.loc". > >> > >> 1 server for the .loc root > >> 3 servers for xxx.loc (server1), yyy.loc (server2), zzz.loc (server3) > >> > >> Running BIND 9 at every server. > >> > >> Any suggestions or good links are highly appreciated. > >> > >> Best regards, > >> Peter > >> _______________________________________________ > >> Please visit https://lists.isc.org/mailman/listinfo/bind-users to > >> unsubscribe from this list > >> > >> bind-users mailing list > >> bind-users@lists.isc.org > >> https://lists.isc.org/mailman/listinfo/bind-users > >> > >> > >> > > > > _______________________________________________ > > Please visit https://lists.isc.org/mailman/listinfo/bind-users to > > unsubscribe from this list > > > > bind-users mailing list > > bind-users@lists.isc.org > > https://lists.isc.org/mailman/listinfo/bind-users > > _______________________________________________ > Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe > from this list > > bind-users mailing list > bind-users@lists.isc.org > https://lists.isc.org/mailman/listinfo/bind-users -- Mark Andrews, ISC 1 Seymour St., Dundas Valley, NSW 2117, Australia PHONE: +61 2 9871 4742 INTERNET: ma...@isc.org _______________________________________________ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
