Hello Larry,
I had the same "head-ache" when I upgraded to 10.9. It seems that instead going
forward we all took a step behind. I guess this type of free stuff does come
with something attached to it. Anyways, when you upgraded to 10.9 the boot
files were wipe clean from the /System/Library/LaunchDaemons/
Open the terminal and restore it by entering the comand!
---------------------------------------------------------------------------------------
launchctl load -w /System/Library/LaunchDaemons/org.isc.named.plist
echo "launchctl start org.isc.named" >> /etc/launchd.conf
---------------------------------------------------------------------------------------
Then re-start BIND
---------------------------------------------------------------------------------------
launchctl start org.isc.named
---------------------------------------------------------------------------------------
There are several places talking about this stuff but you can verify here:
Configure BIND to Launch at Startup
http://www.macshadows.com/kb/index.php?title=How_To:_Enable_BIND_-_Mac_OS_X's_Built-in_DNS_Server
I hope that helps!
--
Eduardo Bonsi
System Admin
BEARTCOMMUNICATIONS
beart...@pacbell.net
________________________________
From: Larry Stone <lston...@stonejongleux.com>
To: bind-users@lists.isc.org
Sent: Friday, January 17, 2014 6:45 PM
Subject: Non-responsive name servers when started during boot on OS X Mavericks
10.9
Background: I have been using my Macintosh as a server running the client
version of OS X (not OS X Server) for many years. Until 10.9 (Mavericks), Apple
provided BIND and it worked just fine. My servers were internal only providing
behind-NAT local addresses for the local network as well as caching for
external names. All went well.
With the release of 10.9, BIND was no longer provided (I’m currently on
10.9.1). I initially restored the version of named from 10.8 along with my
configuration and zone files and all was well (at least as far as I could
tell). I then switched to building from source and all was still well (I
thought). The primary server was just upgraded to 9.8.6-P2 while the secondary
(not a server except as a redundant name server) is still at 9.8.6-P1 (upgrade
planned for this weekend).
Problem: This morning, by happenstance, both were rebooted a few minutes apart
and suddenly, nobody could access anything. Finally figured out that named on
both was not responding (queries timed out). Killed named (which was
immediately restarted by Apple’s launchd) and all was well. Rebooted the
secondary to see if it was repeatable and same thing. Nothing of interest in
the log - both the initial startup at boot time and restart log identically
(and it does log the RFC 1918 empty zones warning so it gets that far). I’m
guessing there’s some resource not available at boot time that’s causing named
to hang but that really just a will guess.
I know I’m not providing much information but there’s nothing else I can find
so any help with just figuring out why it fails when started at boot time will
be a help.
--
Larry Stone
lston...@stonejongleux.com
http://www.stonejongleux.com/
_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe
from this list
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users
_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe
from this list
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users
