In message <527a8ac4.3010...@adminlinux.com.br>, Listas writes: > > Hi, > > I'm enabling IPv6 dual stack in my network and my Bind authoritative > servers are working perfectly with the ip6.arpa zones. > > But my Recursive DNS server cannot resolve the reverse zone records from > my private network. I tried to make a setup similar to what I do for my > private network (IPv4 RFC1918) 10.0.0.0, but no success. > > Can anyone help me? > > The configuration of my recursive server is here: > http://adminlinux.com.br/recursive-bind.conf
Firstly you are using the wrong addresses range. You should be using FD00::/8 for locally assigned addresses. FC00::/8 is reserved for centrally assigned local addresses and there isn't yet a registry to perform those assignments so no one should be using them. Secondly change "5.a.8.3.2.e.3.e.0.0.c.f.ip6.arpa" into a slave zone and transfer the contents from the other server. Add this server as a nameserver to the zone or configure the master to send this server notify messages when the zone changes. Presumably the existing master zone is just a empty zone which is why you got the NXDOMAIN. Mark -- Mark Andrews, ISC 1 Seymour St., Dundas Valley, NSW 2117, Australia PHONE: +61 2 9871 4742 INTERNET: ma...@isc.org _______________________________________________ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
