I think a workaround is to replace the router's DNS server or DHCP server by another one in the LAN, and avoid the "dlinkrouter" name existence.
Al 18/06/13 01:04, En/na Norman Fournier ha escrit: > On 2013-06-17, at 4:11 PM, Charles Swiger wrote: > >> On Jun 17, 2013, at 3:00 PM, Norman Fournier <nor...@normanfournier.com> >> wrote: >>> [ ... ] >>> (...Members of the httpd-users list says the same thing - its not an httpd >>> problem. >> >> From what you've said below, they're quite right. >> >>> I am just trying to take possibilities off my list of potential errors, >>> sorry if I am annoying you, it's unintentional and symptomatic of my >>> ignorance, so I'm asking questions. I think that is a legitimate use of my >>> subscription to this list, and the list's raison d'ĂȘtre. Surely the list is >>> not exclusively for individuals who know what they're talking about?..) >> >> This list is for discussion of ISC's BIND. > > For me, the list is called bind-users, not bind-discussion. BIND discussion > would be a higher echelon than a user list. I'm a bind user and I have a > Domain Name Server problem, somewhere, that I have been trying to solve for a > long time and am going over my steps once again. I need to get my webserver > online and there is a problem with the name or lookup or the router. I have > not found any errors in httpd, bind or the router configuration that have > solved it. The latest hint I got was an ostensible missing in-addr.arpa PTR > record, which, to me, made it relevant to BIND. > >> Let's assume that you've got a D-Link router which has a single public IP >> from your provider, and provides NAT translation for a private RFC-1918 >> subnet, and you've placed your webserver on a VM which lives behind that >> D-Link router. If so, you will need to enable static port forwarding for >> 80/tcp to the VM running the webserver, or perhaps place that IP in the >> router's "Enable DMZ Host" section of the firewall config. >> >> This is basic networking; it doesn't have any close relationship to either >> DNS or webservers. > > The ports forwarded to the 192.168.0.101 webserver are unchanged since 2005; > dns, http and ssh to appropriate ports. The router did change, the static ips > changed, as well as the physical location of the network and servers. I don't > know what the issue is, that's why I asked about including explicit PTR files > to the domain name, as well as the localhost in-addr.arpa, which is the > latest in a list of "possible irregularities" I have turned up so far that I > need to confirm one way or the other. > > I do appreciate you taking valuable time to answer. I have to wade into it > all again. I hope I am still welcome to ask questions here as I have seen > others do, since I subscribed to this list in an effort to learn about BIND > and DNS, a number of years ago. > > Norman > _______________________________________________ > Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe > from this list > > bind-users mailing list > bind-users@lists.isc.org > https://lists.isc.org/mailman/listinfo/bind-users > _______________________________________________ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users