Okay, I have confirmed the correct named.conf file by simply removing it then restarting bind. It throws an error until replaced.
So any other ideas why the version directive won't work? Can anyone confirm with 9.9.1-P2? Jeff On Aug 17, 2012, at 9:02 PM, Michael Hoskins (michoski) <micho...@cisco.com> wrote: > -----Original Message----- > > From: Jeff Justice <listacco...@starionline.com> > Date: Friday, August 17, 2012 6:10 PM > To: "bind-users@lists.isc.org" <bind-users@lists.isc.org> > Subject: Re: Version statement... > >> Okay, here's what I know: >> >> named-checkconf says there are no errors. >> There is only one named process running. >> When I apply my edited named.conf, the log shows named stopping and >> restarting with no errors. >> >> How can I check to see the path where my named process thinks named.conf >> is located? > > I think configuration and OS tools are your best bet... > > You could check ps if you haven't already (sometimes it's there), you > could check /etc/sysconfig/named or /etc/rc.conf*, or grep init scripts. > You could use lsof and look for clues. > > _______________________________________________ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
