On 6/7/11 7:51 AM, "Barry Finkel" <bsfin...@anl.gov> wrote:
> There was a zone serial number mismatch, each zone expired three days > ago, and new zones were transferred from the master. But the zone > files on disk still have the higher serial numbers. There are no .jnl > files on the disk. A "dig" on the server for the zone serial numbers > shows the lower numbers, so BIND has those correct serial numbers. If you have multiple masters for which this server is a slave, then check the serial number on all of the masters. I think you will find that one of them is higher than the other... > I > assume that if I stopped BIND (rndc stop) and restarted it, then I > would again see the serial number mismatches. I can try this during > the day, as this server is not heavily used. Is there any debugging I > need to run? Thanks. -- Daniel J McDonald, CCIE # 2495, CISSP # 78281 _______________________________________________ bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
