Assuming a Linux BIND host, in /etc/network/interfaces something like the
following might work for your IPv6 configuration:
iface eth0 inet6 static
address 2001:1930:e03::e
netmask 64
gateway 2001:1930:e03::xxxx
where you would substitute for xxxx the interface identifier of your router on
IPv6 subnet 0.
Jeffry A. Spain
Network Administrator
Cincinnati Country Day School
-----Original Message-----
On 04/28/11 11:20, Khuu, Linh Contractor wrote:
> Hello,
> We just added the IPv6 address on our DNS servers. When we started
> named, we see these errors in the log:
> prefix length for 2001:1930:e03::e is unknown (assume 128)
> prefix length for ::1 is unknown (assume 128)
> So far, named is still running fine... I can't find any information to
> correct these errors.
> Thanks,
> Linh Khuu
>
>
>
> _______________________________________________
> bind-users mailing list
> bind-users@lists.isc.org
> https://lists.isc.org/mailman/listinfo/bind-users
These are not bind errors, but errors in how you configured IPv6 in the
host OS. You have not specified the prefix length(compares to /24 for
IPv4 cidr notation) in your network configuration for your IPv6 addresses.
Lyle Giese
LCR Computer Services, Inc.
_______________________________________________
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users
_______________________________________________
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users
