On Feb 10, 2011, at 11:26 AM, Ryan Novosielski wrote: > dig: isc_socket_create: address family not supported > > I've read that I shouldn't let this error message lead me anywhere in > particular. Does anyone have some advice for where to start > troubleshooting?
The error message you mention is likely an attempt to do something with IPv6 addresses; perhaps your machine or your network is explicitly configured to do IPv4 only? Does a dig against a well-known working nameserver return valid results like below? % dig -t mx health.nyc.gov @4.2.2.2 ; <<>> DiG 9.6.3 <<>> -t mx health.nyc.gov @4.2.2.2 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 12326 ;; flags: qr rd ra; QUERY: 1, ANSWER: 4, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;health.nyc.gov. IN MX ;; ANSWER SECTION: health.nyc.gov. 900 IN MX 10 vwall4.nyc.gov. health.nyc.gov. 900 IN MX 10 vwall1.nyc.gov. health.nyc.gov. 900 IN MX 10 vwall2.nyc.gov. health.nyc.gov. 900 IN MX 10 vwall3.nyc.gov. ;; Query time: 29 msec ;; SERVER: 4.2.2.2#53(4.2.2.2) ;; WHEN: Thu Feb 10 14:42:15 2011 ;; MSG SIZE rcvd: 124 Regards, -- -Chuck _______________________________________________ bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
