> > > Yes. To explain my setup further, there is a view based on > > > src-IPs for some clients, where recursion is turned on. > > > The rest of the world gets non-recursive answers, e.g. with > > > authoritative data, or refused. > > > > > > In case of that specfic forward zone, bind answers in the > > > non-recursive case with a referal to itself (there is only one > > > public IP), which is causing a loop, as there is no way to > > > specify a different port in the DNS protocol (AFAIK)
> On Fri, Oct 01, 2010 at 11:25:31AM +0200, Kalman Feher wrote: > > This is the problem and the reason I agree with Kevin. The referral is > > correct behaviour. Your DNS set up is wrong. You have 2 choices and a third On 01.10.10 12:39, Joerg Dorchain wrote: > Well, I could agree agree that "wrong" means not thought of by > RfC-Designers and bind implementators (yet). probably it was not thought because it's wrong. > > less palatable option: > > > > 1. Make the other DNS software available on another IP. So normal DNS > > behaviour works. > > Hm, this is not too easy in practice, but of course optimal solution. > IPv6 will help here, I hope. I don't think this will solve the problem, it will just be a workaround for it. > > 2. Add the zone as a slave within your authoritative view. (this option may > > be the easiest for your situation). > > Not feasible as it contains dynamically generated content, > typically with a TTL of 0. this strongly indicates that there's something broken in your DNS. The DNS is not designed to provide anything that short-lived, the whole DNS architecture is based on cachind. Are you doing any kind of DNS-based load balancing? -- Matus UHLAR - fantomas, uh...@fantomas.sk ; http://www.fantomas.sk/ Warning: I wish NOT to receive e-mail advertising to this address. Varovanie: na tuto adresu chcem NEDOSTAVAT akukolvek reklamnu postu. Enter any 12-digit prime number to continue. _______________________________________________ bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
