What does your ifconfig -a output look like? Are you sure the External AXFR
queries are coming form 192.168.2.12?
On Wed, Sep 1, 2010 at 12:38 AM, Scott Simpson
<scott.simp...@computer.org>wrote:
> I'm trying to transfer my two zones "internal" and "external" from master
> to
> slave using two IP addresses and it isn't working.
>
> On my master I have:
>
> view "internal" {
> allow-transfer { 192.168.2.1; };
> ...
> view "external" {
> allow-transfer { 192.168.2.12; };
> ...
>
> My slave has two IP addresses 192.168.2.1 and 192.168.2.12 (I used a
> secondary
> IP address on the card). On the slave I have
>
> view "internal" {
> transfer-source 192.168.2.1;
> ...
> view "external" {
> transfer-source 192.168.2.12;
> ...
>
> When I try to transfer the domain "external", I get a permission denied on
> the
> master. I know that the slave is using the correct transfer-source IP
> address
> because I did a tcpdump and it shows the correct address for the two
> transfers.
>
> Interestingly, if I switch the "internal" and "external" stanzas on the
> master, I get "external" only and not "internal". What gives? Thanks.
> Scott
>
> _______________________________________________
> bind-users mailing list
> bind-users@lists.isc.org
> https://lists.isc.org/mailman/listinfo/bind-users
>
_______________________________________________
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users
