Hi
After changing configuration from "listen-on-v6 { any; };" to using
specific addresses, I observed the following in the log after issuing
`rndc reload` (times are CEST):-
29-Jul-2009 04:44:22.893 network: error: binding TCP socket: address in use
29-Jul-2009 04:44:22.893 network: error: binding TCP socket: address in use
29-Jul-2009 04:44:22.893 network: info: no longer listening on ::#53
29-Jul-2009 04:44:22.965 general: info: reloading configuration succeeded
29-Jul-2009 04:44:23.031 general: info: reloading zones succeeded
29-Jul-2009 05:19:10.179 general: info: received control channel command
'reload'
29-Jul-2009 05:19:10.180 general: info: loading configuration from
'/usr/local/bind/9.6.1-P1/etc/named.conf'
29-Jul-2009 05:19:10.182 general: info: using default UDP/IPv4 port
range: [1024, 65535]
29-Jul-2009 05:19:10.182 general: info: using default UDP/IPv6 port
range: [1024, 65535]
29-Jul-2009 05:19:10.194 general: info: reloading configuration succeeded
29-Jul-2009 05:19:10.194 general: info: reloading zones succeeded
After the reload, BIND no longer listened on tcp sockets, but udp
sockets worked ok. After restarting named, it was listening on tcp
sockets once more. Based on the log it looks like it is trying to bind
to the address-specific tcp sockets before releasing tcp [::]:53.
BIND is 9.6.1-P1 on Linux x86.
Regards,
Chris
_______________________________________________
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users
