On 3 dic, 21:08, Mark Andrews <[EMAIL PROTECTED]> wrote: > In message <[EMAIL PROTECTED]>, > > pollex writes: > > Hi Jinmei I have followed your advice and I have installed and > > compiled the Bind 9.3.6 with the following command: > > STD_CDEFINES="-ISC_SOCKET_FDSETSIZE=4096" ./configure --prefix=/usr/ > > local/bind9.3.6 --enable-threads > > But now I have the following issue, I can't start bind with multi > > threading... > > I have in the init script the lines: > > OPTIONS="-u bind -n 8 -t /var/lib/named -c /etc/bind/named.conf" > > and in the start part: > > mount --bind /proc/ /var/lib/named/proc/ -o ro (This is needed because > > bin runs in jail) > > > Any idea? (With the previous version this works ok) > > Log messages would be useful. > > What does the following report? > "named -g -u bind -n 8 -t /var/lib/named -c /etc/bind/named.conf" > > > Thanks for all > > > _______________________________________________ > > bind-users mailing list > > [EMAIL PROTECTED] > >https://lists.isc.org/mailman/listinfo/bind-users > > -- > Mark Andrews, ISC > 1 Seymour St., Dundas Valley, NSW 2117, Australia > PHONE: +61 2 9871 4742 INTERNET: [EMAIL PROTECTED] > _______________________________________________ > bind-users mailing list > [EMAIL PROTECTED]://lists.isc.org/mailman/listinfo/bind-users
Mark, thanks for the reply this is the report: 04-Dec-2008 09:52:54.950 starting BIND 9.3.6 -g -u bind -n 8 -t /var/ lib/named -c /etc/bind/named.conf 04-Dec-2008 09:52:54.950 using up to 4096 sockets 04-Dec-2008 09:52:54.954 loading configuration from '/etc/bind/ named.conf' 04-Dec-2008 09:52:54.956 using default UDP/IPv4 port range: [1024, 65535] 04-Dec-2008 09:52:54.956 using default UDP/IPv6 port range: [1024, 65535] 04-Dec-2008 09:52:54.958 listening on IPv4 interface lo, 127.0.0.1#53 04-Dec-2008 09:52:54.958 could not listen on UDP socket: address in use 04-Dec-2008 09:52:54.958 creating IPv4 interface lo failed; interface ignored 04-Dec-2008 09:52:54.958 listening on IPv4 interface eth1, ###.###.#.### #53 04-Dec-2008 09:52:54.958 could not listen on UDP socket: address in use 04-Dec-2008 09:52:54.958 creating IPv4 interface eth1 failed; interface ignored 04-Dec-2008 09:52:54.958 not listening on any interfaces 04-Dec-2008 09:52:54.959 /etc/bind/named.conf:80: couldn't add command channel 127.0.0.1#953: address in use 04-Dec-2008 09:52:54.959 ignoring config file logging statement due to -g option 04-Dec-2008 09:52:54.960 additionally listening on IPv4 interface lo, 127.0.0.1#53 04-Dec-2008 09:52:54.960 could not listen on UDP socket: address in use 04-Dec-2008 09:52:54.960 creating IPv4 interface lo failed; interface ignored 04-Dec-2008 09:52:54.960 additionally listening on IPv4 interface eth1, ###.###.#.### #53 04-Dec-2008 09:52:54.960 could not listen on UDP socket: address in use 04-Dec-2008 09:52:54.960 creating IPv4 interface eth1 failed; interface ignored 04-Dec-2008 09:52:54.961 zone 0.in-addr.arpa/IN: loaded serial 1 04-Dec-2008 09:52:54.961 zone 127.in-addr.arpa/IN: loaded serial 1 04-Dec-2008 09:52:54.962 zone 255.in-addr.arpa/IN: loaded serial 1 04-Dec-2008 09:52:54.962 /etc/bind/db.bind:5: class 'CH' != zone class 'IN' 04-Dec-2008 09:52:54.962 zone bind/IN: loading master file /etc/bind/ db.bind: bad class 04-Dec-2008 09:52:54.962 zone localhost/IN: loaded serial 1 04-Dec-2008 09:52:54.962 running 04-Dec-2008 09:52:56.244 shutting down 04-Dec-2008 09:52:56.245 exiting In the other version i had a line like this found X CPUs, using X worker threads Thanks again _______________________________________________ bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
