From: Cisco Employee <[email protected]<mailto:[email protected]>>
Date: Thursday, March 12, 2015 at 9:49 AM
To: Nitin Singh <[email protected]<mailto:[email protected]>>, 
"[email protected]<mailto:[email protected]>"
 
<[email protected]<mailto:[email protected]>>
Cc: Hassan Hosseini <[email protected]<mailto:[email protected]>>, Ryan 
Bickhart <[email protected]<mailto:[email protected]>>, Manoj Sharma 
<[email protected]<mailto:[email protected]>>, John E Drake 
<[email protected]<mailto:[email protected]>>, Cisco Employee 
<[email protected]<mailto:[email protected]>>
Subject: Re: draft-sajassi-bess-evpn-etree


Hi Nitin,

This  “ESI label” is advertised using “ESI label extended community” along with 
the Eth-AD per ES route as always.

The purpose of this label is to have a root/leaf indication in the data-plane 
for traffic being sourced from single-home sites as discussed in that paragraph.

Cheers,
Ali

From: Nitin Singh <[email protected]<mailto:[email protected]>>
Date: Wednesday, March 11, 2015 at 5:38 PM
To: 
"[email protected]<mailto:[email protected]>"
 
<[email protected]<mailto:[email protected]>>
Cc: Hassan Hosseini <[email protected]<mailto:[email protected]>>, Ryan 
Bickhart <[email protected]<mailto:[email protected]>>, Manoj Sharma 
<[email protected]<mailto:[email protected]>>, John E Drake 
<[email protected]<mailto:[email protected]>>
Subject: RE: draft-sajassi-bess-evpn-etree
Resent-From: <[email protected]<mailto:[email protected]>>
Resent-To: 
<[email protected]<mailto:[email protected]>>
Resent-Date: Wednesday, March 11, 2015 at 8:11 PM

Hi ,

This is regarding the following text from the section 3.2 of the draft .

“Furthermore, a PE advertises two special ESI MPLS labels: one for
Root and another for Leaf. These are used by remote PEs for traffic
originating from single-homed segments and for multi-homed segments
that are not connected to the advertising PE. Note that these special
labels are advertised on a per PE basis (i.e. each PE advertises only
two such special labels).”

Can you please provide an explanation about the special ESI MPLS labels .  
Which route type in EVPN will be used  to carry these labels ?

Thanks
Nitin
_______________________________________________
BESS mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/bess

Reply via email to