Hi Robert, it's solved. Hardware, the USB connector. Was able to solder, now it works fine. Sometimes there was a second entry with lsusb. Then I found out, it's the connector, with a little pressure it worked. Then microscope, solder iron.... I spent 2 days and nights on that 😠But I learned a Lot Thanks to all Kasimir
Robert Nelson <robertcnel...@gmail.com> schrieb am Do., 3. Juni 2021, 15:37: > > > > The project requires the pru units, that works fine. > > Touch is eating up my time. And I expect it makes no sense to order > other touch displays and the status is still the same. > > USB based touch was expected as "best and simple" solution. I need SPI > and GPIO for surrounding hardware. That works fine. > > HDMI is required to have the possibility to connect "any" monitor. There > is 1m distance between BBB and display. > > RPI is not an option for me, because I need the PRU's. > > lsusb ? i don't see it showing up in dmesg.. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/qynrtLRdkvU/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAOCHtYg%3DBonY6FnKgsxP%2B5SEdP1g376ZnAGYXnuFwCY9Tj2Tsw%40mail.gmail.com > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHjW%3DhcB01%2B6gG1uZB%3DZt5jzcv-kHMOEW8htttCHd4XBdN%2BSUw%40mail.gmail.com.
