I am using a windows machine with PuTTY to connect to the BBB. On Sun, Mar 28, 2021 at 5:44 AM Bob Hammond <propgrin...@gmail.com> wrote:
> I am able to connect to the BBB with PuTTY and get a prompt to log in. I > have tried debian/temppwd and that doesn't work. > > I've read about using a serial connection to the BBB and interrupting the > boot sequence to gain access. Anyone done that? > > On Saturday, March 27, 2021 at 4:41:30 PM UTC-7 myi...@hotmail.com wrote: > >> Try logging in as user : debian >> Password: temppwd >> >> Check your spelling after u enter user name >> >> Sent from my iPhone >> >> On Mar 27, 2021, at 7:12 PM, amf <fitte...@gmail.com> wrote: >> >> >> >> I followed your instructions, once I obtained the new ip, I was able to >> login as the user of the origanl BBB. >> Without knowing details of your setup it is difficult to help >> is your desktop/laptop a windows or linux machine? >> if linux you can get the ip of the new BBB with "ping <hostname>.local" >> provided 'avahi' is installed (there may be other ways, this works for me) >> >> ping beaglebone.local >> PING beaglebone.local (192.168.3.108) 56(84) bytes of data. >> 64 bytes from 192.168.3.108: icmp_seq=1 ttl=64 time=1.31 ms >> >> if windows, someone else will need to chime in, >> >> >> >> On Saturday, March 27, 2021 at 7:39:21 AM UTC-5 propg...@gmail.com wrote: >> >>> I duplicated my BBB setup to a SD card using this procedure: >>> >>> Debian distribution: >>> >>> 1. Boot master BBB with no SD card in >>> 2. Insert SD card >>> 3. Log in (e.g. with serial terminal, SSH etc.) and run sudo >>> >>> /opt/scripts/tools/eMMC/beaglebone-black-make-microSD-flasher-from-eMMC.sh. >>> LEDs will flash in sequence whilst SD card is being written. >>> 4. When the LEDs stop and the script terminates, remove the SD card. >>> 5. Insert SD card into new BBB then power on. >>> 6. eMMC will be flashed; LEDs on new BBB will flash in sequence >>> until complete. >>> >>> After doing this, I rebooted the BBB. >>> >>> Now, I am unable to remotely log in using PuTTY, user is root, and root >>> password. Or any other username and password. >>> >>> The BBB is running fine (collecting seismic data) but I am completely >>> locked out! >>> >>> Any suggestions on how to get access to the BBB? >>> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/833795ff-61b4-418c-a142-9aed980e01a7n%40googlegroups.com >> <https://groups.google.com/d/msgid/beagleboard/833795ff-61b4-418c-a142-9aed980e01a7n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/KvIoUzehk_o/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/0fea8e1c-4c08-43cc-a023-5fce0b05209en%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/0fea8e1c-4c08-43cc-a023-5fce0b05209en%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAKoB7OpieQonkXW003iq5APE2Ze74UMWBOrpNXF6q%3DSp8vZwMg%40mail.gmail.com.
