Hi Martin, after connecting TP1 to P9 pin 1 (DGND) and executed sudo dd if=/opt/scripts/device/bone/bbbw-eeprom.dump of=/sys/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0050/eeprom finally my BBBw has been detected as BBB wireless. By means connmanctl tool I have successfully connected it to my router.
Thanks again Renato Il giorno domenica 21 marzo 2021 alle 00:53:11 UTC+1 martin....@googlemail.com ha scritto: > renato borromeo <renato....@gmail.com> schrieb am So., 21. März 2021, > 00:36: > >> Hi Martin, >> thanks for your answer. >> I realized with dmesg that my board is detected as BBB. >> The version.sh output is not very clear due to not ascii characters, but >> seems different >> from the ones printed on my beagleobones sticker. >> >> git:/opt/scripts/:[d36fe9a7be9ebfc872b10a470e904ab4c61c4516] >> ]eprom:[A335BNLT°O >> dogtag:[BeagleBoard.org Debian Image 2017-10-10] >> bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot >> 2017.09-00002-g0f3f1c7907] >> kernel:[4.4.91-ti-r133] >> nodejs:[v6.12.2] >> uboot_overlay_options:[enable_uboot_overlays=1] >> >> uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-4-TI-0 >> 0A0.dtbo] >> uboot_overlay_options:[enable_uboot_cape_universal=1] >> pkg:[bb-cape-overlays]:[4.4.20171215.0-0rcnee1~stretch+20171215] >> pkg:[bb-wl18xx-firmware]:[1.20170829-0rcnee1~stretch+20170829] >> pkg:[firmware-ti-connectivity]:[20170823-1rcnee0~stretch+20170830] >> >> Now, as written on link you suggested, I need to rewrite eeprom with BBBW >> data. >> It is reported to ground TP1 before the dd command, but by schematic WP >> of CAT24C256W >> is connected with a resistor to VDD (write protect fixed), and TP1 is >> just a DGND. >> How did you rewrite the eeprom? Forcing WP signal to DGND? >> >> Regards >> >> Renato >> >> Il giorno sabato 20 marzo 2021 alle 19:14:49 UTC+1 >> martin....@googlemail.com ha scritto: >> >>> hi, >>> check out the rfkill command. >>> do you have both, wifi and bluetooth unblocked ? >>> >>> Once i had the problem that the bbbw will be detected as an beagle bone >>> black. >>> Check out the dmesg command. Very at the beginnig you can read if a bbbw >>> or a bbb was detected. >>> >>> if a bbb was detected check out /opt/tools version.sh command. (It is >>> somwhere in this directory) >>> >>> Check if your eeprom name is the same as the one that is printed on your >>> beagleobones sticker on P9 header or P8 header. >>> >>> If there is something different checkout this post: >>> https://groups.google.com/g/beagleboard/c/7DoU66kyjp4 >>> >>> >>> bye bye >>> >>> >>> >>> >>> >>> Am Sa., 20. März 2021 um 19:09 Uhr schrieb renato borromeo < >>> renato....@gmail.com>: >>> >>>> I all, >>>> I have a BBBw with the original "Linux beaglebone 4.4.91-ti-r133" on >>>> board. >>>> With "ip a" command wlan0 is not present and also with connmanctl >>>> technologies command only wired eth is present even if the BBBw has only >>>> wifi and bluetooth. >>>> >>>> I followed several link about this issue and checked newer and older >>>> images >>>> with same results. >>>> >>>> Do I need a specific device tree to enable this wifi module or >>>> something else? >>>> >>>> Thanks in advances for support. >>>> >>>> Renato Borromeo >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to beagleboard...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/beagleboard/b5e3bb92-3edc-4a9e-bef5-5732a94186a2n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/beagleboard/b5e3bb92-3edc-4a9e-bef5-5732a94186a2n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/4c752b12-4d4e-4af1-be36-7eb8046addddn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/beagleboard/4c752b12-4d4e-4af1-be36-7eb8046addddn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/fd257fb5-2967-402e-80b9-3e5ac50833afn%40googlegroups.com.
