Hi Robert
i did this for adding u-boot overlay.
*uboot_overlay_addr4=/lib/firmware/BB-UART4-00A0.dtbo*
you said that i can get rid of require('bonescript'). what is the
alternate method in that case
Help is deeply appreciated
regards
On Wednesday, February 24, 2021 at 10:54:29 PM UTC+5:30 Piyush Raj ae19m009
wrote:
> @ Robert
>
> I am not a linux person. can you elaborate on how to load BB-UART4 u-boot
> overlay in slightly simpler words if possible.
>
> On Wednesday, February 24, 2021 at 10:49:22 PM UTC+5:30 RobertCNelson
> wrote:
>
>> On Wed, Feb 24, 2021 at 11:08 AM Piyush Raj ae19m009
>> <ae19...@smail.iitm.ac.in> wrote:
>> >
>> > I tried suppressing the error produced by line 462 by bruteforce
>> (putting is_capemgr as True). and got rid of this error.
>> > however, got stuck with the error in 468 (Device Tree overlay fragment
>> BB-UART4 not loaded).
>> > which means that load_dt fails to fetch the port. i am trying to find
>> out location of load_dt function. hopeful to solve this issue with
>> community help. thanks
>>
>> load_dt is a relic from kernel overlays.. Just make sure you loaded
>> the BB-UART4 u-boot overlays and nuke your "var b =
>> require('bonescript');" as it's not supported/needed/required
>> anymore..
>>
>> Regards,
>>
>> --
>> Robert Nelson
>> https://rcn-ee.com/
>>
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/3c9b7e24-c5df-4742-b4b0-a4c666558ee4n%40googlegroups.com.
