Hi everyone its there a new graphical interface image for the Beaglebone AI ?? or just the one that Robert shared ??? Thanks in advance!!
On Thursday, June 25, 2020 at 10:08:02 AM UTC-7 Dennis Bieber wrote: > On Thu, 25 Jun 2020 12:26:35 +0100, in gmane.comp.hardware.beagleboard.user > Adrian Hatton <adriannhatton-re5j...@public.gmane.org> > wrote: > > >Hi Robert > > > >Thanks for sharing the Debian GUI image. > > > >I did have a question, I previously attempted to update the IoT image on > the BB AI using the SD card method and was not successful. > > Which image did you have on the SD card? > > > > >When you insert the SD card then boot the BB AI should you hold down any > buttons to force a certain boot mode, or should it just directly boot from > the SD and install the image? > > Inserting an image with uEnv.txt configured to activate the flasher > mode has worked for me for some three (going on four?) years on BBB > (without touching the boot select button), and for the BB AI which doesn't > even have a boot select button. > > I think the last time I needed the boot select on a BBB was when > upgrading to the last edition of Wheezy -- from a time when the eMMC u-boot > /did not/ check for an SD card from which to complete booting. > > > -- > Dennis L Bieber > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ee683cf0-e5cd-4013-97d1-f2fc3a93adbbn%40googlegroups.com.
