On Wednesday, September 9, 2020 at 5:19:37 PM UTC+2, RobertCNelson wrote: > > On Wed, Sep 9, 2020 at 9:58 AM Pavel Yermolenko <py....@sunrise.ch > <javascript:>> wrote: > > > > Just tried p8 and p9: > > > > debian@beaglebone:~$ config-pin -l p9.08 > > ERROR: open() for > /sys/firmware/devicetree/base/ocp/P9_08_pinmux/pinctrl-names failed, No > such file or directory > > P9.08 is a SYS_5V, definitely not user touchable... > > > debian@beaglebone:~$ config-pin -l p8.08 > > ERROR: open() for > /sys/firmware/devicetree/base/ocp/P8_08_pinmux/pinctrl-names failed, No > such file or directory > > debian@beaglebone:~$ > > debian@bbb-pwr02-ser10:~$ config-pin -l P8.08 > > Available modes for P8_08 are: default gpio gpio_pu gpio_pd gpio_input > timer > > Please run: > > sudo /opt/scripts/tools/version.sh > > and we can help point out what's wrong.. > > Regards, >
> -- > Robert Nelson > https://rcn-ee.com/ Thanks. Here it is: debian@beaglebone:~$ config-pin -l P8.08 ERROR: open() for /sys/firmware/devicetree/base/ocp/P8_08_pinmux/pinctrl-names failed, No such file or directory debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh [sudo] password for debian: git:/opt/scripts/:[b39ec679648a6be8f25f48bd1c9784c1fc5a0c46] eeprom:[A335BNLT000C2017BBBG0292] model:[TI_AM335x_BeagleBone_Black] dogtag:[BeagleBoard.org Debian Buster IoT Image 2020-04-06] bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2019.04-00002-g07d5700e21]:[location: dd MBR] UBOOT: Booted Device-Tree:[am335x-boneblack.dts] kernel:[4.19.94-ti-r42] nodejs:[v10.21.0] /boot/uEnv.txt Settings: uboot_overlay_options:[enable_uboot_overlays=1] uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo] uboot_overlay_options:[enable_uboot_cape_universal=1] pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>] pkg:[bb-cape-overlays]:[4.14.20200814.0-0~buster+20200814] pkg:[bb-wl18xx-firmware]:[1.20200813.1-0~buster+20200813] pkg:[kmod]:[26-1] pkg:[librobotcontrol]:[1.0.5-git20200715.0-0~buster+20200716] pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~buster+20200305] groups:[debian : debian adm kmem dialout cdrom floppy sudo audio dip video plugdev users systemd-journal bluetooth netdev i2c gpio pwm eqep remoteproc admin spi iio docker tisdk weston-launch xenomai cloud9ide] cmdline:[console=ttyO0,115200n8 root=/dev/mmcblk1p1 ro rootfstype=ext4 coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] dmesg | grep remote [ 30.277069] remoteproc remoteproc0: wkup_m3 is available [ 31.377520] remoteproc remoteproc0: powering up wkup_m3 [ 31.377555] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168 [ 31.377855] remoteproc remoteproc0: remote processor wkup_m3 is now up dmesg | grep pru dmesg | grep pinctrl-single [ 0.452881] pinctrl-single 44e10800.pinmux: 142 pins, size 568 dmesg | grep gpio-of-helper [ 0.454615] gpio-of-helper ocp:cape-universal: ready lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub END debian@beaglebone:~$ Regards, Pavel. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/6df29b30-cdce-49b0-8caa-0d7087b9f6e9o%40googlegroups.com.
