Did you reset the network or reboot the board so the change will take place?
Cheers, Jon On Mon, Apr 20, 2020 at 4:45 PM evilwulfie <[email protected]> wrote: > connman has taken over maybe ? > > > > On 4/20/2020 3:46 PM, maxmike wrote: > > > I have been running BBB networking for some time using a netmask of > 255.255.255.0; I now have to expand the network > to 500 hosts, so I changed the mask to 255.255.254.0 to give a network at > 192.168.0.0/23. I edited /etc/network/interfaces, > but that seems to change nothing as per following; blessed connman is NOT > running: > > (got the following off the serial connection) > > Debian GNU/Linux 8 beaglebone ttyS0 > > BeagleBoard.org Debian Image 2017-03-19 > > root@beaglebone:~# cat /etc/network/interfaces > auto lo > iface lo inet loopback > > auto eth0 > iface eth0 inet static > address 192.168.0.231 > netmask 255.255.254.0 > gateway 192.168.0.1 > > root@beaglebone:~# ip addr > 1: lo... > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state > UP group default qlen 1000 > link/ether b0:d5:cc:ca:18:0d brd ff:ff:ff:ff:ff:ff > inet 192.168.1.231/24 brd 192.168.1.255 scope global eth0 > valid_lft forever preferred_lft forever > inet6 fe80::b2d5:ccff:feca:180d/64 scope link > valid_lft forever preferred_lft forever > 3: usb0... > 4: usb1: ... > 5: can0: ... > 6: can1: ... > > root@beaglebone:~# ifconfig > eth0 Link encap:Ethernet HWaddr b0:d5:cc:ca:18:0d > inet addr:192.168.1.231 Bcast:192.168.1.255 Mask:255.255.255.0 > inet6 addr: fe80::b2d5:ccff:feca:180d/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:404 errors:0 dropped:0 overruns:0 frame:0 > TX packets:58 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:34286 (33.4 KiB) TX bytes:7710 (7.5 KiB) > Interrupt:173 > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/0fcbaf33-44c5-42e6-8018-420282dcd335%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/0fcbaf33-44c5-42e6-8018-420282dcd335%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/71e73eba-d8e5-178e-85b3-3bcc695b879d%40gmail.com > <https://groups.google.com/d/msgid/beagleboard/71e73eba-d8e5-178e-85b3-3bcc695b879d%40gmail.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG99bkqb5kJ7Meg2tozxGZq3rGKw_btTzF2YHf3r2p3YzZjh1Q%40mail.gmail.com.
