The links and movies are all about the ubuntu image. There seem to be two approaches for flashing a ubuntu image on the eMMC: 1. Use a flasher image 2. Use a ubuntu image and configure it to automatically flash
I guess either approach should work. If not I would connect a cable. For the kali image, you want to flash it on an SD drive and then I would expect it to boot. If not, use a cable. Note that the cable also should contain a chip from usb to uart (ftdi is the a known supplier of these chips). Op do 13 feb. 2020 20:08 schreef <[email protected]>: > yes i think i still have the one i made in college. i would have to look > if not i could just cut up a spare usb cable > > On Thursday, February 13, 2020 at 1:02:13 PM UTC-6, RobertCNelson wrote: >> >> Sounds like your having lots of problems, do you have a usb serial >> adapter available to you too plug into j1? >> >> https://elinux.org/Beagleboard:BeagleBone_Black_Serial >> >> I've been in vacation, so replies will be late. >> >> Regards, >> >> >> On Thu, Feb 13, 2020, 12:44 PM <[email protected]> wrote: >> >>> ok so the link in blue is the one i used to make the image because it >>> says GUI which is what i want. i just saw the one in red though that says >>> flasher. with that one also have a gui ? Maybe thats my problem? or at >>> least one of them? >>> >>> >>> [image: Capture.PNG] >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/beagleboard/fbeab34d-80c2-4f83-9594-db0657408fe5%40googlegroups.com >>> <https://groups.google.com/d/msgid/beagleboard/fbeab34d-80c2-4f83-9594-db0657408fe5%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/f5d01413-3d47-491b-af51-1b27f9c1d676%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/f5d01413-3d47-491b-af51-1b27f9c1d676%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHK0gJ1EeGkWmB1Pcr0Q1Y-8twssr3D66AtZz%2BBPbAfh9a-k3w%40mail.gmail.com.
