It depends where you connect it. Do not use any of the "boot pins" if you can avoid them.
Read the System Reference Manual https://github.com/beagleboard/beaglebone-black/wiki/System-Reference-Manual#671-boot-configuration-design https://github.com/beagleboard/beaglebone-black/wiki/System-Reference-Manual#83-pin-usage-consideration If you do try to use any of the boot pins, follow the instructions about not connecting to them until after the SYS_RESET line goes high. --- Graham == On Friday, January 24, 2020 at 12:09:19 PM UTC-6, sanjeevi suresh wrote: > > When I connect a sensor to the board, and once I restart the board, > whether the sensor input will affect the board? > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a6bb39b4-69d2-450e-89f4-4be7a5844718%40googlegroups.com.
