On Sun, Sep 30, 2018 at 10:29 AM <[email protected]> wrote: > > I can't get the BBB to boot from eMMC or SD. The following is what I get on > the serial terminal at start: > > > U-Boot SPL 2018.03-00002-gac9cce7c6a (Apr 05 2018 - 13:07:46 -0500) > Trying to boot from MMC1 > Loading Environment from EXT4... ** File not found /boot/uboot.env ** > > ** Unable to read "/boot/uboot.env" from mmc0:1 ** > Failed (-5) > mmc_load_image_raw_sector: mmc block read error > Loading Environment from EXT4... ** Can't read partition table on 0:0 ** > ** Invalid partition 1 ** > Failed (-5) > ** Can't read partition table on 0:0 ** > ** Partition 1 not valid on device 0 ** > spl_register_fat_device: fat register err - -1 > spl_load_image_fat: error reading image u-boot.img, err - -1 > Loading Environment from EXT4... ** Can't read partition table on 0:0 ** > ** Invalid partition 1 ** > Failed (-5) > bad MBR sector signature 0x2f40 > spl: no partition table found > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ###
That looks like failing media... can you please test "bootup" with this image: https://rcn-ee.net/rootfs/bb.org/testing/2018-09-30/stretch-console/bone-debian-9.5-console-armhf-2018-09-30-1gb.img.xz (it's pretty small, not much is really on it, besides for testing..) Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjfQi8wb9GH6i5cMMhXOTWbykKyh2qc6naSjHTMacN5pQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
