hi yesterday i tried to connect the BBB from usb but the connection over
internet failed always.
I tried to change OS: ManjaroKDE(default), ManjaroGnomeLive, Ubuntu18Live.
I tried to change the host connection to internet (from eth to wifi).
I tried to put udev rules in /lib/udev/rules.d/73-beaglebone.rules and
/lib/udev/rules.d/99-beaglebone.rules.
I tried to change manually the setting of the BB usb in ip:192.168.7.2
netmask: 255.255.255.0 gtw: 0.0.0.0 / 192.168.1.1 and i was able to ping
the ip but the connection in the browsers (firefox and surf) was refused
and also the ssh connection: ssh: connect to host 192.168.7.2 port 22:
Connection refused.
this is the ifconfig
enp0s20u3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::2ac9:7ec0:9f88:8410 prefixlen 64 scopeid 0x20<link>
ether 74:e1:82:78:65:dc txqueuelen 1000 (Ethernet)
RX packets 49 bytes 11178 (10.9 KiB)
RX errors 3 dropped 0 overruns 0 frame 3
TX packets 2 bytes 469 (469.0 B)
TX errors 58 dropped 0 overruns 0 carrier 0 collisions 0
enp5s0f1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 08:62:66:b5:c2:9f txqueuelen 1000 (Ethernet)
RX packets 4654 bytes 3256416 (3.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4238 bytes 430478 (420.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 43 base 0xd000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 901 bytes 75744 (73.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 901 bytes 75744 (73.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.20.10.2 netmask 255.255.255.240 broadcast 172.20.10.15
inet6 fe80::acdc:d52f:2565:d1 prefixlen 64 scopeid 0x20<link>
ether 28:c2:dd:10:7d:6f txqueuelen 1000 (Ethernet)
RX packets 1741 bytes 2008158 (1.9 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1241 bytes 151289 (147.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
how can i solve this problem?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/22469706-1cc7-4474-a76d-eb5f37c7614a%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
