Thank you for the input Chris and Dennis, I have picked up working on the BBB again and tried plugging it into a display via the mini HDMI and it seems like the beaglebone does not boot into the OS as all I see is a blinking cursor top left of the screen.
I tried booting from an SD card and that seems to work fine but I am unsure how to access the eMMC to retrieve files before re-imaging. Is there a process making that possible? Thanks in advance On Thursday, May 17, 2018 at 12:52:38 PM UTC+12, yassyass wrote: > > Hi guys, > > Not sure what's happened and not sure where to start troubleshooting. > > My BBB won't respond to SSH requests from Terminal on my mac, this was > working perfectly fine just days ago and I am trying to go back and > understand what changed. > > I worked mostly using Cloud9 and running scripts with Python and JS so I > have quite a bit saved on it that I would like to recover if possible > before resorting to re-imaging. > > The board seems to turn on fine with all the LEDs turn on sequentially and > then they start pulsing as they would when the OS is running. > > The board is both connected directly to my Mac and to a LAN via ethernet. > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c6afea89-612d-494a-9fd5-1809c3107b68%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
