Hi is there any one who can able to write android image on BeagleBone Green Wireless, if yes please guide me how to it. Thanks in advance have nice day
20 Mayıs 2016 Cuma 02:56:48 UTC+3 tarihinde [email protected] yazdı: > > > Hello all, > > > I downloaded the android image from here > <http://bbbandroid.sourceforge.net/> and I followed the usual > instructions using Win32DiskImager. I inserted the 16GB SD card to the > beaglebone and while holding down the S2 button that is next to the SD card > slot I applied power using an external power supply. I kept the button > pressed for few seconds after power is on. > > > Booting the on-board eMMC image will work fine, the beaglebone appears on > my network with SSH port available. With this android image the board won't > show up on the network; Port scanning sees the device but no open ports > available, also ping sometimes gives me Time out or unreachable. I'm not > sure if it even booted or not. The user LEDs are flashing probably > according to there usual pattern. > > > I tried this <http://elinux.org/Beagleboard:Android> article but I get > the same effect. As far as I know, the BB green and black are the same > exact hardware which means the same should work on both, that's what BB > website <https://beagleboard.org/latest-images> is providing. > > > What am I missing here? Thank you in advance. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4ea76150-9d4f-4daa-9f7c-278cf765b6aa%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
