Would you please add a note in the following location (and/or other applicable pages) about running init-ramfs when updating the kernel? And maybe even a blurb about why this is needed?
https://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-SetupmicroSDcard Thanks!! On Wednesday, May 16, 2018 at 5:12:40 PM UTC-5, Jeff Andich wrote: > > I ran into a similar issue when I upgraded my kernel on an existing BB-X15 > image and then attempted to run the flasher script from the SD card on a > BB-X15: > > > http://beagleboard.org/discuss?place=msg%2Fbeagleboard%2Fx1mxG7c-ilg%2F2Q8OROMCAwAJ > > Where Robert indicated to do: > > (1) depmod -a > > (2) sudo update-initramfs -ck `uname -r` (or update-initramfs -uk 'uname > -r') > > > Not sure if updating the module dependency db is needed, but something to > consider.. > > > > On Wednesday, May 16, 2018 at 4:05:31 PM UTC-5, RobertCNelson wrote: >> >> On Wed, May 16, 2018 at 3:56 PM, John B <[email protected]> wrote: >> > I found that the eMMC flasher >> > (/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh) no longer appears to >> work >> > after I upgraded to Kernel 4.14.x. I traced this to >> > /opt/scripts/tools/eMMC/functions.sh in prepare_environment(). It >> seems >> > that /proc and /sys are not mounted when the flasher script is executed >> from >> > init. Needless to say, this caused agita for the rest of the script. >> I'm >> > not sure if this has been addressed someplace else (maybe it has to do >> with >> > the fact I am using initrd.img-4.9.82-ti-r102? I doubt it though.) >> > >> > In any event, in case someone is running into the same issue, I have >> > attached my updated functions.sh which addresses the issue by mounting >> /proc >> > and /sys just after the script does /tmp. This seems to work fine; it >> > should even work on a system where /proc and /sys are already mounted. >> >> >> before you run that script, just make sure you run: >> >> sudo update-initramfs -ck `uname -r` >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/af4561d7-f278-40da-a3bd-afdea6044f94%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
