I add my custom capes under ###Additional custom capes I have no problems that way unless i create them in my files they all load fine
i dont see that cape in my bb.org-overlays/scr/arm directory Is that custom ? On 2/25/2018 6:47 PM, Alan Thomason wrote: > Hello all... > > I am trying to use a newer image than I have in the past: > BeagleBoard.org Debian Image 2017-10-10 > > I have flashed the eMMC and am able to boot from it with no microSD > card in place. > > I have been working for the last year with an older (2014) image and I > compile and load an overlay.using the capemgr (sudo sh -c "echo > DesiredOverlay > /sys/devices/platform/bone_capemgr/slots") method. I > understand from other posts that this is no longer the preferred > method, and I need to use the new method. I /think/ I have done what > the following suggests: > https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays > starting at: U-Boot /boot/uEnv.txt configuration > > But I can't use the same PRU processes as I used before. I get an > error (Segmentation fault) that in the previous image would indicate > that I had not yet loaded the overlay. I don't see anything in the > dmesg output that would indicate that the uboot/uEnv.txt had run at all. > > My questions: > 1. Does it look like I am properly loading the overlay > (EBB-PRU-CNKSim-00A0.dtbo) in the uEnv.txt? > 2. Shouldn't I be able to see this in the dmesg output? > 3. Is there a possibility that the /boot/uEnv.txt is not being run? > 4. Is there an easy way to put tell-tales in the uEnv.txt file so > that you could easily see where in the file the process had gotten to? > > Thanks in advance, > > Alan > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/9fec54c7-a337-4764-a11e-4dd30d0faa34%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/9fec54c7-a337-4764-a11e-4dd30d0faa34%40googlegroups.com?utm_medium=email&utm_source=footer>. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/fd774c1b-6a55-f234-ad65-b694f27de4dd%40gmail.com. For more options, visit https://groups.google.com/d/optout.
