I'd say about a month or two, to fully transition for all devices.. I've been testing v4.9.x-rcX's on a good number of boards on my test farm. Just starting to see uptime's that mirror v4.4.x for stability..
Regards, On Thu, Dec 8, 2016 at 10:17 PM, Baozhu Zuo <[email protected]> wrote: > What's the kernel 4.9 plan? will we switch to kernel 4.9 ? > > 在 2016年11月3日星期四 UTC+8上午12:24:27，robert nelson写道： >> >> On Tue, Nov 1, 2016 at 4:00 PM, Robert Nelson <[email protected]> wrote: >> > Status: >> > >> > 4.9.0-rc3-ti-r1: >> > >> > BBB - okay - HDMI video >> > BBG - okay >> > BBGW - broken wlan0 - bluetooth okay >> > BBBW - broken wlan0 - bluetooth okay - HDMI video >> > BLUE - broken wlan0 - bluetooth okay >> > >> > v4.9.0-rc3-ti-r2 (staged *1) >> > >> > BBGW - wlan0 works >> > BBBW - wlan0 works >> > BLUE - wlan0 works >> > >> > 1: >> > https://github.com/RobertCNelson/ti-linux-kernel-dev/commit/04ee88d2fb71a3e7a3ae9d2d27de3cdb752c973c >> >> I've just added a forward port of the eqep driver.. One of the big >> changes, the eqep clock should be enabled/setup via the device-tree, >> instead of the driver.. >> >> [ 36.292972] eqep 48300180.eqep: ver. 1.0 >> [ 36.293178] eqep 48300180.eqep: count_mode:0 >> [ 36.293187] eqep 48300180.eqep: invert_qa:1 >> [ 36.293195] eqep 48300180.eqep: invert_qb:1 >> [ 36.293201] eqep 48300180.eqep: invert_qi:0 >> [ 36.293208] eqep 48300180.eqep: invert_qs:0 >> [ 36.293215] eqep 48300180.eqep: swap_inputs:0 >> [ 36.293222] eqep 48300180.eqep: QDECCTL:0x0180 >> [ 36.293230] eqep 48300180.eqep: QPOSINIT:0x00000000 >> [ 36.293236] eqep 48300180.eqep: QPOSMAX:0xffffffff >> [ 36.293241] eqep 48300180.eqep: QPOSCNT:0x00000000 >> [ 36.293249] eqep 48300180.eqep: omit_interrupt:0 >> [ 36.293254] eqep 48300180.eqep: QEINT:0x0800 >> [ 36.293261] eqep 48300180.eqep: QUPRD:0x05f5e100 >> [ 36.293267] eqep 48300180.eqep: QEPCTL:0x009e write >> [ 36.293273] eqep 48300180.eqep: QEPCTL:0x009e read >> [ 36.293296] eqep 48300180.eqep: irq:193, clk_rate:100000000 >> >> It would be awesome if someone who had it working in v4.4.x-bone/etc.. >> Could verify. ;) >> >> It's part of "r2" which is now pushed out, and should be in the apt >> repo in a couple hours >> >> Changes from r1 -> r2: >> >> wl18xx: firmware loading fixes >> cpufreq: now enabled: (odd bug, where we get 1Ghz on bbb's, but 800Mhz >> on Octavo based boards) >> eqep: re-enabled >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ > > -- > You received this message because you are subscribed to the Google Groups > "Beagle Alpha" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYh5tEekzNO1hYsj2MVBH_Q0%2BYszxdBLPUocmTVSQpyvkg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
