Did you ever find a solution to this issue? I ran into the same error today.
On Monday, May 9, 2016 at 6:08:14 AM UTC-5, Jitheesh T wrote: > > I have been trying to program the eMMC on beaglebone black using uniflash > through ethernet interface. I have gathered all the files based on the > below URL, > > > > > http://processors.wiki.ti.com/index.php/Sitara_Linux_Program_the_eMMC_on_Beaglebone_Black > > > > But I am not able to flash the board. Please find the error that i am > getting below, > > > > " U-Boot SPL 2014.07-00107-gd28f2b9 <Feb 18 2016 - 20:31:36> ### ERROR ### > Please RESET the board ### " > > > > This is the first step i have done and i have been using > ti-sdk-am335x-evm-08.00.00.00. Then somebody in the ti e2e forum suggested > me to use the latest SDK from repository. I have tried that > also(ti-processor-sdk-linux-am335x-evm-02.00.01.07). With this i am getting > a new error. Please find the error below, > > > > " U-Boot SPL 2015.07-00080-gfa53e9d-dirty <Feb 22 2016 - 17:00:39> SPL: > Unsupported Boot Device! ### ERROR ### Please RESET the board ### " > > > > Can somebody please provide any help on this issue as we are stuck at this. > > > Note:We are tried with flasher image with ethernet support. To support > boot from ethernet we removed R67 and Mounted R92 on the beaglebone black > board. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/555d4955-ee53-46d8-84e9-80164bca5157%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
