I am using Debian GNU/Linux 8 beaglebone ttyGS0 BeagleBoard.org Debian Image 2016-06-19
Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] The IP Address for usb0 is: 192.168.7.2 The IP Address for usb0 is: 192.168.7.2 I am not sure how, I was doing some updates using apt-get update this weekend and downloading some software on the BBB and now I cannot bring the Ethernet back up. I lost the configuration in the ifconfig file. I went from this: Last login: Sun Jun 19 18:17:47 2016 root@beaglebone:~# ifconfig eth0 Link encap:Ethernet HWaddr 54:4a:16:df:9a:7a inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::564a:16ff:fedf:9a7a/64 Scope:Link UP BROADCAST RUNNING MULTICAST DYNAMIC MTU:1500 Metric:1 RX packets:1469 errors:0 dropped:0 overruns:0 frame:0 TX packets:462 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:143743 (140.3 KiB) TX bytes:166998 (163.0 KiB) Interrupt:175 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:36976 errors:0 dropped:0 overruns:0 frame:0 TX packets:36976 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:2847688 (2.7 MiB) TX bytes:2847688 (2.7 MiB) usb0 Link encap:Ethernet HWaddr 54:4a:16:df:9a:70 inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252 inet6 addr: fe80::564a:16ff:fedf:9a70/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3921 errors:0 dropped:7 overruns:0 frame:0 TX packets:39 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:327206 (319.5 KiB) TX bytes:7382 (7.2 KiB) root@beaglebone:~# *************************** to this *************************** root@beaglebone:~# ifconfig eth0 Link encap:Ethernet HWaddr 54:4a:16:df:9a:7a UP BROADCAST MULTICAST DYNAMIC MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:175 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) as you can see, I've lost the inet addr in eth0 and I don't have a usb0 at the end. The interesting thing is that I can get the Ethernet access at home with my router. I think all of this changed when I did an upt-get update while installing dronekit. The /etc/network/interfaces file seems to be ok: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.12 netmask 255.255.255.0 gateway 192.168.1.1 # Example to keep MAC address between reboots #hwaddress ether DE:AD:BE:EF:CA:FE # The secondary network interface #auto eth1 #iface eth1 inet dhcp # WiFi use: -> connmanctl # Ethernet/RNDIS gadget (g_ether) # Used by: /opt/scripts/boot/autoconfigure_usb0.sh iface usb0 inet static address 192.168.7.2 netmask 255.255.255.252 Does anyone have any idea what happened and what I can do to fix it? Thank you very much. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c7f4ec1a-d11b-407b-aae1-5813a36a07f8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
