Trying to install BBGW-blank-debian-8.5-seeed-iot-armhf-2016-08-07-4gb.img
onto a new BBGW. Had problems, so I went out and bought a new micro SD
card and a new card reader just in case.
When I hold the boot button down as I plug in power, I get one of two
scenarios happening:
- User LEDs #0 and 2 turn on, then lights 1 and 3 turn on, and back to
#0 and 2, then 1 and 3. I've left it like that for over an hour thinking
maybe that was a new pattern.
- All 4 LEDs turn on, then off, then on again, at the same rate as the
normal "heartbeat". So blink twice, then 1/2 second pause, and blink twice
again.
- User LED #0 (heartbeat) blinks maybe 3 or 4 times, then nothing else.
No other activity.
Is there a page where the blink patterns are explained? If not, does
someone know where in the code to look so I can find the different blink
patterns and their explanation?
Stéphane
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/577055f6-c7f5-4e07-9c5f-c610f14822b3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
