n <[email protected]>
<[email protected]>
<[email protected]>
<ca+t6qpkxuawycfhmq7a-puhbdirhw7mxy7nswhmpbvwvhfv...@mail.gmail.com>
<[email protected]>
n <[email protected]>
User-Agent: Wanderlust/2.15.9
>> Have you considered my suggestion to enable MIMO in the Wifi by default?
> I haven't noticed that suggestion yet. Do you say how to do so?
>From my mail dated 27 July 2016, sent to both lists:
After some reading of the kernel sources (always a pleasure), I've found
how to enable 2x2 MIMO on the BBGW. I'm getting 77Mbit/s downstream (TCP
iperf), which is pretty cool, but only 22Mbit/s upstream.
In order to enable 2x2 MIMO on the board, you need to add a file
/etc/modprobe.d/wl18xx.conf containing the following line:
options wl18xx ht_mode=default
This might actually be an upstream bug -- the default ht_mode should
probably be "default" (duh), and the documentation for the "n_antennas_2"
module parameter is incorrect (it is documented as defaulting to 1, but
actually defaults to 2).
-- Juliusz
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/87r3ac5deo.wl-jch%40pps.univ-paris-diderot.fr.
For more options, visit https://groups.google.com/d/optout.
