Hello, I made use of FTDI cable to debug the possible issue with my beaglebone black, It shows following errors:
(1) bone-capemgr bone_capemgr.9: failed to load firmware 'BB-DCAN1-00A0.dtbo (2) bone-capemgr bone_capemgr.9: slot #9: BB-UART1 conflict P9.24 ( #3:BB-BONE-LCD4-01) (3) bone-capemgr bone_capemgr.9: slot #9:Failed verification (4) bone-capemgr bone_capemgr.9: slot #10: BB-UART2 conflict P9.21 ( #7:ADAFRUIT-UART2) (5)bone-capemgr bone_capemgr.9: slot #10: Failed Previously I also tried connecting an ethernet cable to my beaglebone, but for some reason I am not able to make SSH connection to it. I also tried connecting the LCD display , but on LCD all it shows is the linux logo at the boot up and then the screen remains blank forever. Can someone please help me out with this? Thanks, -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/426a23c1-17f4-4f57-8bb3-3cf50b69ee27%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
