Hello， I tried to use *Chipsee LCD 7 EXP R* as a screen of my BBB (the OS is : *Linux beaglebone 4.1.15-ti-rt-r43 #1 SMP PREEMPT RT Thu Jan 21 20:13:58 UTC 2016 armv7l GNU/Linux*), I did *sudo sed -i -e 's:16:24:g' /etc/X11/xorg.conf *and changed *dtb=am335x-boneblack-bbb-exp-r.dtb* in /boot/uEnv.txt, ( by the introduction of : http://elinux.org/Beagleboard:Capes_3.8_to_3.14#Chipsee_bbb-exp-r ). But the result is wired, I can light the screen but without anything display, which means the screen is always light with empty content.
There must be something wrong in my process, but I have no idea to correct it, Thanks so much for any advice. Best regards, Victor -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f3ac939f-d72f-4593-a3bf-7cdbd871ef1a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
