Hello there, i'm currently trying to port our existing system from angstrom to the newest debian. After some initial struggles I got everything up and running on debian lxqt version. After playing around with it i realized I don't need a whole bunch of packages preinstalled on lxqt version from http://elinux.org/Beagleboard:BeagleBoneBlack_Debian.
I mainly need c++/java/(node) running on the system, so I decided to go with debian console version and install the missing packages. This works fine for most of the packages, but it seems like I can't get the device overlays to work like they do in lxqt: We use "/dev/mem" with mmap in our code, so I have to setup the device overlays correctly... What I did is: uncomment: dtb=am335x-boneblack-emmc-overlay.dtb add: cape_enable=bone_capemgr.enable_partno=BB-UART1 in uEnv.txt git clone https://github.com/beagleboard/bb.org-overlays overlays cd overlays sh ./dtc-overlay.sh sh ./install.sh Which passes without errors. After a reboot /sys/(...)/slots holds the entries for BB-UART1 like it does in the lxqt version, but it seems like there's sth. else missing because I can't get the c++lib to work like before. Someone has a clue, what I'm missing here? Is there a document somewhere which describes the differences between lxqt, console and iot? Regards, thx in advance! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
