Hello,

I have been working on a BBB from the 2015-11-12 image (debian 8.1).

It works well, so I tried to use the image in our older beaglebone (BBW) 
products, since it is supposed to be compatible.

However it doesn't boot ! I've tried again with the vanilla image (the same 
image but without my custom modifications), and it doesn't boot either.
In fact, it starts the boot operation, and after 1min30, prints some errors 
related to the cape manager, and then all the board's lights go off (even 
the ethternet LEDs), and it goes radio-silent.

You will find attached my complete boot log from the console output on USB. 
At first glance, what strikes me is :

"
U-Boot SPL 2015.10-00001-g143c9ee (Nov 06 2015 - 15:27:19)
No AC power, disabling frequency switch
*bad magic*


U-Boot 2015.10-00001-g143c9ee (Nov 06 2015 - 15:27:19 -0600), Build: 
jenkins-github_Bootloader-Builder-274
"

and then, at the end (this is with the "quiet" boot option, contrary to the 
attached log) :

"
Starting kernel ...

[    4.603825] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[    5.004287] omap-sham 53100000.sham: initialization failed.
[    5.036255] cpu cpu0: cpu0 clock notifier not ready, retry
[   90.286357] irq 187: nobody cared (try booting with the "irqpoll" option)
[   90.294553] handlers:
[   90.296889] [<c009f34c>] irq_default_primary_handler threaded 
[<c0677db0>] tps65217_irq
[   90.305077] Disabling IRQ #187
[   90.413154] bone_capemgr bone_capemgr: slot #0: No cape found
[   90.473109] bone_capemgr bone_capemgr: slot #1: No cape found
[   90.533136] bone_capemgr bone_capemgr: slot #2: No cape found
[   90.593106] bone_capemgr bone_capemgr: slot #3: No cape found
"
 
Did I miss something ?

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.
U-Boot SPL 2015.10-00001-g143c9ee (Nov 06 2015 - 15:27:19)
No AC power, disabling frequency switch
bad magic


U-Boot 2015.10-00001-g143c9ee (Nov 06 2015 - 15:27:19 -0600), Build: 
jenkins-github_Bootloader-Builder-274

       Watchdog enabled
I2C:   ready
DRAM:  256 MiB
Reset Source: Power-on reset has occurred.
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment

Net:   <ethaddr> not set. Validating first E-fuse MAC
cpsw
Hit any key to stop autoboot:  0 
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
reading uEnv.txt
1179 bytes read in 6 ms (191.4 KiB/s)
gpio: pin 55 (gpio 55) value is 1
Loaded environment from uEnv.txt
Importing environment from mmc ...
Checking if uenvcmd is set ...
gpio: pin 56 (gpio 56) value is 1
Running uenvcmd ...
1697 bytes read in 67 ms (24.4 KiB/s)
debug: [/boot/vmlinuz-4.1.12-ti-r29] ...
8266760 bytes read in 1153 ms (6.8 MiB/s)
debug: [/boot/initrd.img-4.1.12-ti-r29] ...
3968710 bytes read in 591 ms (6.4 MiB/s)
debug: [/boot/dtbs/4.1.12-ti-r29/am335x-boneblack-emmc-overlay.dtb] ...
56709 bytes read in 112 ms (494.1 KiB/s)
debug: [console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 
rootwait coherent_pool=1M cape_universal=enable] ...
debug: [bootz 0x82000000 0x88080000:3c8ec6 0x88000000] ...
Kernel image @ 0x82000000 [ 0x000000 - 0x7e2408 ]
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Using Device Tree in place at 88000000, end 88010d84

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.12-ti-r29 (root@a5-imx6q-wandboard-2gb) (gcc 
version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Mon Nov 9 22:46:19 UTC 2015
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing 
instruction cache
[    0.000000] Machine model: TI AM335x BeagleBone Black
[    0.000000] cma: Reserved 24 MiB at 0x8e000000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (sgx neon )
[    0.000000] PERCPU: Embedded 13 pages/cpu @cfb68000 s22336 r8192 d22720 
u53248
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 64448
[    0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8 
root=/dev/mmcblk0p2 rootfstype=ext4 rootwait coherent_pool=1M 
cape_universal=enable
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 211748K/260096K available (10729K kernel code, 929K 
rwdata, 3712K rodata, 684K init, 902K bss, 23772K reserved, 24576K 
cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0e226e0   (14442 kB)
[    0.000000]       .init : 0xc0e23000 - 0xc0ece000   ( 684 kB)
[    0.000000]       .data : 0xc0ece000 - 0xc0fb664c   ( 930 kB)
[    0.000000]        .bss : 0xc0fb9000 - 0xc109a8d8   ( 903 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 
interrupts
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000037] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 
89478484971ns
[    0.000103] clocksource timer1: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 79635851949 ns
[    0.000146] OMAP clocksource: timer1 at 24000000 Hz
[    0.001176] Console: colour dummy device 80x30
[    0.005043] console [tty0] enabled
[    0.005182] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.005311] This ensures that you still see kernel messages. Please
[    0.005435] update your kernel commandline.
[    0.005574] Calibrating delay loop... 297.36 BogoMIPS (lpj=1486848)
[    0.056398] pid_max: default: 32768 minimum: 301
[    0.056905] Security Framework initialized
[    0.057175] AppArmor: AppArmor disabled by boot time parameter
[    0.057307] Yama: becoming mindful.
[    0.058040] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.058201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.060898] Initializing cgroup subsys blkio
[    0.061076] Initializing cgroup subsys memory
[    0.061296] Initializing cgroup subsys devices
[    0.061441] Initializing cgroup subsys freezer
[    0.061606] Initializing cgroup subsys net_cls
[    0.061743] Initializing cgroup subsys perf_event
[    0.061885] Initializing cgroup subsys net_prio
[    0.062141] CPU: Testing write buffer coherency: ok
[    0.062406] ftrace: allocating 34832 entries in 103 pages
[    0.362624] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.363063] Setting up static identity map for 0x80008280 - 0x800082d8
[    0.416423] Brought up 1 CPUs
[    0.416594] SMP: Total of 1 processors activated (297.36 BogoMIPS).
[    0.416694] CPU: All CPU(s) started in SVC mode.
[    0.419073] devtmpfs: initialized
[    0.476530] VFP support v0.3: implementor 41 architecture 3 part 30 variant 
c rev 3
[    0.546635] omap_hwmod: tptc0 using broken dt data from edma
[    0.547516] omap_hwmod: tptc1 using broken dt data from edma
[    0.548317] omap_hwmod: tptc2 using broken dt data from edma
[    0.561870] omap_hwmod: debugss: _wait_target_disable failed
[    0.635341] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 19112604462750000 ns
[    0.640901] xor: measuring software checksum speed
[    0.736454]    arm4regs  :   364.800 MB/sec
[    0.836291]    8regs     :   326.800 MB/sec
[    0.936296]    32regs    :   326.400 MB/sec
[    1.036289]    neon      :   500.000 MB/sec
[    1.036382] xor: using function: neon (500.000 MB/sec)
[    1.036911] pinctrl core: initialized pinctrl subsystem
[    1.042432] NET: Registered protocol family 16
[    1.053740] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    1.073845] OMAP GPIO hardware version 0.1
[    1.114832] No ATAGs?
[    1.114953] hw-breakpoint: debug architecture 0x4 unsupported.
[    1.121093] omap4_sram_init:Unable to allocate sram needed to handle errata 
I688
[    1.121292] omap4_sram_init:Unable to get sram pool needed to handle errata 
I688
[    1.347127] raid6: int32x1  gen()    68 MB/s
[    1.516556] raid6: int32x1  xor()    53 MB/s
[    1.686566] raid6: int32x2  gen()    90 MB/s
[    1.856803] raid6: int32x2  xor()    60 MB/s
[    2.026506] raid6: int32x4  gen()    84 MB/s
[    2.196411] raid6: int32x4  xor()    60 MB/s
[    2.366353] raid6: int32x8  gen()    83 MB/s
[    2.536319] raid6: int32x8  xor()    55 MB/s
[    2.706315] raid6: neonx1   gen()   434 MB/s
[    2.876288] raid6: neonx2   gen()   561 MB/s
[    3.046363] raid6: neonx4   gen()   569 MB/s
[    3.216467] raid6: neonx8   gen()   207 MB/s
[    3.216559] raid6: using algorithm neonx4 gen() 569 MB/s
[    3.216651] raid6: using intx1 recovery algorithm
[    3.247197] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    3.257517] vgaarb: loaded
[    3.259800] SCSI subsystem initialized
[    3.261965] usbcore: registered new interface driver usbfs
[    3.262306] usbcore: registered new interface driver hub
[    3.262708] usbcore: registered new device driver usb
[    3.264636] omap_i2c 44e0b000.i2c: could not find pctldev for node 
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[    3.264961] omap_i2c 4819c000.i2c: could not find pctldev for node 
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
[    3.265555] pps_core: LinuxPPS API ver. 1 registered
[    3.265654] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo 
Giometti <[email protected]>
[    3.265880] PTP clock support registered
[    3.269233] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[    3.271040] Advanced Linux Sound Architecture Driver Initialized.
[    3.273623] NetLabel: Initializing
[    3.273732] NetLabel:  domain hash size = 128
[    3.273816] NetLabel:  protocols = UNLABELED CIPSOv4
[    3.274129] NetLabel:  unlabeled traffic allowed by default
[    3.275190] Switched to clocksource timer1
[    3.660738] NET: Registered protocol family 2
[    3.663477] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    3.663689] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    3.663878] TCP: Hash tables configured (established 2048 bind 2048)
[    3.664171] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    3.664315] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    3.665497] NET: Registered protocol family 1
[    3.667142] RPC: Registered named UNIX socket transport module.
[    3.667271] RPC: Registered udp transport module.
[    3.667359] RPC: Registered tcp transport module.
[    3.667446] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.669201] Unpacking initramfs...
[    4.562313] Freeing initrd memory: 3876K (c8080000 - c8449000)
[    4.563647] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
[    4.563906] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 
counters available
[    4.572436] futex hash table entries: 256 (order: 2, 16384 bytes)
[    4.572874] audit: initializing netlink subsys (disabled)
[    4.573200] audit: type=2000 audit(4.370:1): initialized
[    4.577870] zpool: loaded
[    4.578026] zbud: loaded
[    4.579153] VFS: Disk quotas dquot_6.6.0
[    4.579476] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    4.581783] NFS: Registering the id_resolver key type
[    4.582035] Key type id_resolver registered
[    4.582128] Key type id_legacy registered
[    4.582269] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    4.583398] fuse init (API version 7.23)
[    4.584292] SGI XFS with ACLs, security attributes, realtime, no debug 
enabled
[    4.594491] NET: Registered protocol family 38
[    4.594993] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
250)
[    4.596193] io scheduler noop registered
[    4.596330] io scheduler deadline registered
[    4.596514] io scheduler cfq registered (default)
[    4.601055] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    4.609242] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[    4.613226] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    4.624178] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 155, base_baud 
= 3000000) is a 8250
[    5.504998] console [ttyS0] enabled
[    5.512914] [drm] Initialized drm 1.1.0 20060810
[    5.518253] usbcore: registered new interface driver udl
[    5.605312] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    5.611622] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    5.618791] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[    5.645594] libphy: 4a101000.mdio: probed
[    5.649836] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, 
driver SMSC LAN8710/LAN8720
[    5.661697] cpsw 4a100000.ethernet: Detected MACID = 84:eb:18:e9:ad:b3
[    5.672126] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet 
driver
[    5.680606] usbcore: registered new interface driver pegasus
[    5.686886] usbcore: registered new interface driver rtl8150
[    5.692886] usbcore: registered new interface driver r8152
[    5.703146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.710252] ehci-pci: EHCI PCI platform driver
[    5.715167] ehci-platform: EHCI generic platform driver
[    5.721125] ehci-omap: OMAP-EHCI Host Controller driver
[    5.731725] 47401300.usb-phy supply vcc not found, using dummy regulator
[    5.823889] 47401b00.usb-phy supply vcc not found, using dummy regulator
[    5.900279] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    5.907420] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus 
number 1
[    5.916370] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.923315] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    5.930818] usb usb1: Product: MUSB HDRC host driver
[    5.935974] usb usb1: Manufacturer: Linux 4.1.12-ti-r29 musb-hcd
[    5.942109] usb usb1: SerialNumber: musb-hdrc.1.auto
[    5.949838] hub 1-0:1.0: USB hub found
[    5.953872] hub 1-0:1.0: 1 port detected
[    6.020026] mousedev: PS/2 mouse device common for all mice
[    6.029793] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    6.039850] i2c /dev entries driver
[    6.047930] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    6.058738] omap_hsmmc 48060000.mmc: Got CD GPIO
[    6.164426] mmc0: host does not support reading read-only switch, assuming 
write-enable
[    6.177686] ledtrig-cpu: registered to indicate activity on CPUs
[    6.184857] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    6.193715] mmc0: new high speed SDHC card at address 0007
[    6.204154] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    6.211420] mmcblk0: mmc0:0007 SD8GB 7.42 GiB 
[    6.216426] omap-sham 53100000.sham: initialization failed.
[    6.222284] omap-sham: probe of 53100000.sham failed with error -22
[    6.231940] hidraw: raw HID events driver (C) Jiri Kosina
[    6.238678]  mmcblk0: p1 p2
[    6.248788] usbcore: registered new interface driver usbhid
[    6.254536] usbhid: USB HID core driver
[    6.261144] ashmem: initialized
[    6.270347]  remoteproc0: wkup_m3 is available
[    6.275358]  remoteproc0: Note: remoteproc is still under development and 
considered experimental.
[    6.285804]  remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and 
backward compatibility isn't yet guaranteed.
[    6.306694] oprofile: using arm/armv7
[    6.311677] NET: Registered protocol family 10
[    6.320116] mip6: Mobile IPv6
[    6.323292] NET: Registered protocol family 17
[    6.328616] Key type dns_resolver registered
[    6.333028] mpls_gso: MPLS GSO support
[    6.337752] omap_voltage_late_init: Voltage driver support not added
[    6.345704] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 
regulator/voltdm: -517
[    6.354647] cpu cpu0: cpu0 clock notifier not ready, retry
[    6.362306] PM: bootloader does not support rtc-only!
[    6.367921] ThumbEE CPU extension supported.
[    6.372381] Registering SWP/SWPB emulation handler
[    6.380632] registered taskstats version 1
[    6.388272] Btrfs loaded
[    6.454025] Key type encrypted registered
[    6.467604] input: tps65217_pwr_but as 
/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/input/in|  Impossible d'ouvrir 
/dev/ttyUSB0 !
[    7.404122] random: nonblocking pool is initialized
[   91.680733] irq 188: nobody cared (try booting with the "irqpoll" option)
[   91.687726] CPU: 0 PID: 74 Comm: irq/188-tps6521 Not tainted 4.1.12-ti-r29 #1
[   91.694992] Hardware name: Generic AM33XX (Flattened Device Tree)
[   91.701300] [<c001a208>] (unwind_backtrace) from [<c0014bb0>] 
(show_stack+0x20/0x24)
[   91.709251] [<c0014bb0>] (show_stack) from [<c09b28a0>] 
(dump_stack+0x8c/0xcc)
[   91.716669] [<c09b28a0>] (dump_stack) from [<c00a1830>] 
(__report_bad_irq+0x38/0xd4)
[   91.724605] [<c00a1830>] (__report_bad_irq) from [<c00a1c24>] 
(note_interrupt+0x27c/0x2cc)
[   91.733082] [<c00a1c24>] (note_interrupt) from [<c009f274>] 
(handle_irq_event_percpu+0x1e8/0x254)
[   91.742160] [<c009f274>] (handle_irq_event_percpu) from [<c009f32c>] 
(handle_irq_event+0x4c/0x6c)
[   91.751235] [<c009f32c>] (handle_irq_event) from [<c00a24ac>] 
(handle_level_irq+0xd4/0x14c)
[   91.759783] [<c00a24ac>] (handle_level_irq) from [<c009e660>] 
(generic_handle_irq+0x3c/0x4c)
[   91.768418] [<c009e660>] (generic_handle_irq) from [<c009e98c>] 
(__handle_domain_irq+0x8c/0xfc)
[   91.777320] [<c009e98c>] (__handle_domain_irq) from [<c00094fc>] 
(omap_intc_handle_irq+0xe4/0x138)
[   91.786494] [<c00094fc>] (omap_intc_handle_irq) from [<c09b8280>] 
(__irq_svc+0x40/0x74)
[   91.794672] Exception stack(0xcce57e90 to 0xcce57ed8)
[   91.799840] 7e80:                                     00000001 fa200000 
00000001 000093e8
[   91.808203] 7ea0: cdb1cac0 cdb1cb20 cce4cb40 cdb1cac0 c009fed4 cce4cb40 
00000000 cce57ee4
[   91.816561] 7ec0: cce57ee8 cce57ed8 c009fe78 c09b7974 20070013 ffffffff
[   91.823327] [<c09b8280>] (__irq_svc) from [<c09b7974>] 
(_raw_spin_unlock_irq+0x34/0x64)
[   91.831530] [<c09b7974>] (_raw_spin_unlock_irq) from [<c009fe78>] 
(irq_finalize_oneshot.part.0+0x80/0xdc)
[   91.841311] [<c009fe78>] (irq_finalize_oneshot.part.0) from [<c009ff1c>] 
(irq_thread_fn+0x48/0x50)
[   91.850474] [<c009ff1c>] (irq_thread_fn) from [<c00a0264>] 
(irq_thread+0x144/0x184)
[   91.858340] [<c00a0264>] (irq_thread) from [<c0065818>] (kthread+0xec/0x104)
[   91.865555] [<c0065818>] (kthread) from [<c0010ae8>] 
(ret_from_fork+0x14/0x2c)
[   91.872940] handlers:
[   91.875305] [<c009f34c>] irq_default_primary_handler threaded [<c0677db0>] 
tps65217_irq
[   91.883553] Disabling IRQ #188
[   91.912010] tps65217 0-0024: TPS65217 ID 0xf version 1.2
[   91.919314] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[   91.926636] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[   91.937716] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[   91.946324] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[   91.954627] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[   91.963146] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[   91.970411] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[   91.979671]  remoteproc0: powering up wkup_m3
[   91.984332]  remoteproc0: Booting fw image am335x-pm-firmware.elf, size 
219735
[   91.992848] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x191
[   92.000210]  remoteproc0: remote processor wkup_m3 is now up
[   92.009514] bone_capemgr bone_capemgr: Baseboard: 
'A335BONE,000B,3315BB000311'
[   92.017212] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone - 
#slots=4
[   92.085321] bone_capemgr bone_capemgr: slot #0: No cape found
[   92.145178] bone_capemgr bone_capemgr: slot #1: No cape found
[   92.205180] bone_capemgr bone_capemgr: slot #2: No cape found
[   92.265192] bone_capemgr bone_capemgr: slot #3: No cape found
[   92.271398] bone_capemgr bone_capemgr: initialized OK.
[   92.278284] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating 
voltage latency[950000<->1325000]:-22
[   92.289795] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating 
voltage latency[950000<->1325000]:-22
[   92.304503] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 
00:01:27 UTC (946684887)
[   92.313435] of_cfs_init
[   92.316163] of_cfs_init: OK
[   92.326675] ALSA device list:
[   92.329726]   No soundcards found.
[   92.33

Reply via email to