On Fri, Oct 9, 2015 at 3:19 AM, <[email protected]> wrote: > Hi > > I am trying to make my Beaglebone black an AP. > So now I am following this guide -> http://bogeskov.dk/UsbAccessPoint.html . > It went ok up until the point where I had to download and "make" . This > following set of commands > > sudo apt-get install linux-headers-... > git clone https://github.com/dz0ny/rt8192cu.git > cd rt8192cu > make > sudo make install > > > As soon as I ran make I would get this error: > > make: *** /lib/modules/3.8.13-bone47/build: no such file or directory. > > So I figured that it must still be some kernel headers or files missing. > After quite some searching I found bone47 specific kernel headers on this > website. > https://rcn-ee.net/deb/wheezy-armhf/v3.8.13-bone47/ > > I downloaded the file name : > > linux-headers-3.8.13-bone47_1.0wheezy_armhf.deb and ran dpkg -i on it. > > After installing I went to the rt8192cu dir and ran "make" again. > > This time I got this error > > make[1]: /usr/src/linux-headers-3.8.13-bone47/arch/armv7l/Makefile: No such > file or directory. > make[1]: *** No rule to make target > '/usr/src/linux-headers-3.8.13-bone47/arch/armv7l/Makefile'. Stop.
"make ARCH=arm" > I really just wont know what to do anymore... something so simple can turn > into a complete nightmare. > I just want my Beaglebone to work as an access point. "complete nightmare" simmer down, you might give yourself a heart-attack if you don't learn to relax... Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
