On Fri, Oct 9, 2015 at 4:46 AM, <[email protected]> wrote: > Hi > > I am trying to follow this guide -> http://bogeskov.dk/UsbAccessPoint.html > to make my Beaglebone Black act as a Access Point. > > So I got to the point where I use the following commands. > > sudo apt-get install linux-headers-... > git clone https://github.com/dz0ny/rt8192cu.git > cd rt8192cu > make > sudo make install > > > > Problem comes when I try and run "make". I got an error that a file named > "build" was missing. > > So I tried to install the kernel-headers with this url that is actually the > right one for my BeagleBone OS : > https://rcn-ee.net/deb/wheezy-armhf/v3.8.13-bone47/linux-headers-3.8.13-bone47_1.0wheezy_armhf.deb > > Then I ran dpkg -i linux-headers-3.8.13-bone47_1.0wheezy_armhf.deb and it > looked like it finished. > > So when I go back into the rt8192cu folder I tried running "make" again. > So then I received a different error. > > Makefile:580: /usr/src/linux-headers-3.8.13-bone47/arch/armv7l/Makefile: No > such file or directory > > make[1]: *** No Rule to make target ' > /usr/src/linux-headers-3.8.13-bone47/arch/armv7l/Makefile '. Stop > > > How can I get this to make successfully ? > I just want to use my Beaglebone as a Access point
"make ARCH=arm" Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
