Just installed the 2015-09-06 Machinekit image and when booted it doesn't pick up my USB mouse or keyboard attached to a powered hub. I get the X display on my monitor and a mouse cursor which doesn't move. I can login over ssh. While I realize ssh -X is generally better performance, especially if using the 192.168.7.2 usb connection, but I need a local mouse/keyboard and HDMI display for some things I'm working on.
The bone-debian-8.1-lxqt-4gb-armhf-2015-08-16-4gb.img. works fine with this exact setup. If I unplug the hub, plug in my Logitech USB wireless touchpad/keyboard dongle and press the reset button I get a working mouse/keyboard after it boots. If I then hot unplug the dongle and plug in the hub, the USB mouse/keyboard then work, If I also plug the dongle into the hub both mouse and touchpad work as does both keyboards. What gives? I need the hub because I need a mouse, keyboard, and webcam. Re-booting with the dongle attached to the hub again yields no working mouse/keyboard. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
