So fast Robert :)

I will be back on the BBB in 2 days.

I will check this as soon as possible and I'll tell you what's going on.

Regards

Matt
Il 11/set/2015 17:31, "Robert Nelson" <[email protected]> ha scritto:

> On Fri, Sep 11, 2015 at 10:05 AM, Matteo Loda <[email protected]>
> wrote:
> > A ok Robert, now I understand what you mean.
> >
> > So why the USB to Ethernet adapter doesn't work ?
> >
> > debian@beaglebone:~$ uname -r
> > 3.8.13-bone47
> >
> > debian@beaglebone:~$ lsusb
> > Bus 001 Device 002: ID 0b95:7720 ASIX Electronics Corp. AX88772
> >
> > debian@beaglebone:~$ lsmod
> > Module                  Size  Used by
> > g_multi                47670  2
> > libcomposite           14299  1 g_multi
> > asix                   35075  0
> > mt7601Usta            601404  0
> >
> > ifconfig don't show eth1 ..... which is defined in
> /etc/network/interfaces:
> >
> > # The primary network interface
> > auto eth0
> > iface eth0 inet static
> >         address 192.168.1.71
> >         netmask 255.255.255.0
> >         gateway 0.0.0.0
> >
> > auto eth1
> > iface eth1 inet static
> >         address 192.168.1.88
> >         netmask 255.255.255.0
> >         gateway 0.0.0.0
> >
> > iface usb0 inet static
> >     address 192.168.7.2
> >     netmask 255.255.255.0
> >     network 192.168.7.0
> >     gateway 192.168.7.1
> >
> > debian@beaglebone:/etc/network$ sudo ifup eth1
> > Cannot find device "eth1"
> > Failed to bring up eth1.
> >
> > The ifconfig commadn doesn't show eth1 .
> >
> > In my ubuntu desktop I got both modules mii.ko and usbnet.ko and this
> USB to
> > Ethernet adapter works .. so I asked you where to find these modules ...
>
> i bet it says "rename0"
>
> sudo ifconfig -a
>
> I fixed that a while ago, but if your still running the 2014.05 (cat
> /etc/dogtag) then that's why..
>
> Regards,
>
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to a topic in the
> Google Groups "BeagleBoard" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/beagleboard/ZLwor6m0KGQ/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> [email protected].
> For more options, visit https://groups.google.com/d/optout.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to