Hi, I have a debian image I built with custom device tree and code that I have created. I have copied and flashed this onto new beaglebones using this tool:
http://elinux.org/BeagleBone_Black_Extracting_eMMC_contents This worked great untill a recent shipment of BBB REV C from element 14. I can see a difference a between the two boards where the emmc chips are different the 'old rev c' has a kingston chip whereas the 'new rev c' has a different one with a number 4LA18 JWA06 and M with a circle. When I use the tool mentioned above I get the proper led sequence tell me the emmc is being flashed (blinking once a second, then goes solid when finished). On these new board the LED sequence starts off right but goes solids very quickly and seemingly no image has been copied? What am I missing here?? Cheers, Matt -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
