I use the FTDI cable for years with no errors at all under Win7 64bits. Usually I use putty but also used Hyper Terminal without issues. You should configure the port 115200 8 bits, no parity 10 Сен 2015 г. 17:44 пользователь "Taceant Omnes" <[email protected]> написал:
> I have used putty via USB on Windows on BB White without issue for > more than a year. BB White has a FTDI chip. > > Now I am trying to use the BB Black with the FTDI cable recommended in > the BBB manual, however it is not working in 95% of my tries. Once it > worked when I had the cable working with Putty in Linux and moved the > cable to the Windows PC. By not working I mean nothing I type gets > displayed, or occasionally only a few garbage characters appear (for > example after I power up the BBB). > > I am using the latest FTDI drivers for Windows (32 bits), the latest > version of putty. I have this problem with both Angstrom and Debian on > a BBB rev. B and C. I am configuring putty with 115200 baud. I tried > Tera Term but no luck either. Also tried with and without external > power supply. > > On Linux things are well enough with BBB and the FTDI cable (though > not as good as with BBW). I also tried a UART-USB bridge with CP210x > and it is working well enough on BBB in both Windows and Linux. > > Any ideas on how to make the recommend FTDI cable work reliably on > Windows with BBB? > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
