On Thu, Jul 16, 2015 at 11:47 AM, Bruce Boyes <[email protected]> wrote: > OK I did that. > > But this would seem to disable HDMI and eMMC? All I am trying to do is get > LCD7 to be the default display. If I disable eMMC then I can't boot from > that, and I don't have a complete ubuntu 14.04.2 July 08 with kernel 4.1 > runtime image on a uSD. I don't know how to do that. Is there a performance > hit using uSD as the runtime vs eMMC? > > Before adding this line I was able to boot (with kernel 4.1) from eMMC while > BBB was plugged into LCD7 A3. Is there a way to just disable HDMI and leave > eMMC enabled? > > If I cut those pins between BBB and LCD7 is there a way to make LCD7 the BBB > display under ubuntu? Or does kernel 4.1 accomplish the same thing by > changing how those pins get used? > > I hope those questions were clear.
Sorry, i don't have the eMMC working as an overlay yet.. My lcd's are at home, so i'll try and setup an (am335x-boneblack-emmc-overlay.dtb) tonight, for lcd + eMMC conditions.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
