Hi Robert, In order to see the BBB booting debug process with the help of usb-serial ftdi cable in my laptop, I need to have Ubuntu installed in my laptop right as I am using Windows 7 now?
Basically, I will be needing to use serial connection in putty in Ubuntu? Many thanks! On Mon, Jan 19, 2015 at 10:09 AM, Raj Bharath RB <[email protected]> wrote: > Thanks Robert! Have to get a cable now. > > On Sun, Jan 18, 2015 at 11:52 PM, Robert Nelson <[email protected]> > wrote: > >> On Sun, Jan 18, 2015 at 4:18 PM, Raj Bharath RB <[email protected]> >> wrote: >> > Hi Robert, >> > >> > Actually, as said by you, I downloaded the image BBB Rev C (4GB eMMC) >> > (Flasher: lxde: (1.7GB Free on 4GB eMMC)) in the link >> > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-12-31 as I >> use BBB >> > Rev C. I verified the Md5 to be the same. >> > >> > Then I installed the image in 4GB card using Win32 image installer and >> found >> > everything normal. I also removed the card and inserted in my PC and >> found >> > the files with total size of the card to be 95.7 MB and free space to be >> > 34MB. I think until this point, everything is ok. >> > >> > Next is I inserted the card in BBB, and then supplied power (only >> through >> > adapter) while pressing the boot button until a moment after all the >> LEDs >> > glowed. Then it seemed that all LEDs glowed randomly but within 10 >> seconds, >> > only the 3rd LED (D4) from RESET button is lit throught (many minutes) >> and >> > not the other LEDs. >> > I again pressed the power button till the BBB shuts down and removed the >> > power and did the same process again. But the same thing happened. >> > >> > I waited for ten minutes of flashingand then I shut down BBB and >> removed the >> > card and connected the BBB with my PC through USB and tried to so SSH >> with >> > putty. But it displayed the error stating the connection timed out. >> > >> > Please help me find a solution for this! Thank you. >> >> Connect either the HDMI or usb-serial ftdi cable, it'll report what's >> wrong on both screens'.. >> >> Regards, >> >> -- >> Robert Nelson >> http://www.rcn-ee.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/1g8Tnh8wmfU/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
